
Configuring IP Information
Configuring IP Interfaces
Configuring ARP
The Address Resolution Protocol (ARP) converts IP addresses into physical addresses, and maps the IP address to a MAC address. ARP allows a host to communicate with other hosts only when the IP address of its neighbors is known. To define ARP information:
1.Click Basic Setup > IP Configuration > IP Addressing > ARP. The ARP Page opens:
Figure 76: ARP Page
The ARP Page contains the following fields:
•ARP Entry Age Out — Specifies the amount of time (in seconds) that passes between ARP Table entry. requests. Following the ARP Entry Age period, the entry is deleted from the table. The range is 1 - 40000000. The default value is 60000 seconds.
•Clear ARP Table Entries — Specifies the types of ARP entries that are cleared. The possible values are:
–None — Does not clear ARP entries.
–All — Clears all ARP entries.
–Dynamic — Clears only dynamic ARP entries.
–Static — Clears only static ARP entries.
•Interface — Displays the interface type for which ARP parameters are displayed. The possible field values are:
–Port — The port for which ARP parameters are defined.
–LAG — The LAG for which ARP parameters are defined.
–VLAN — The VLAN for which ARP parameters are defined.
Page 127