D-Link DES-3010FA/GA User Guide

Defining Queue Settings

The Queue Page contains fields for defining the QoS queue forwarding types. To set the queue settings:

1.Click Basic Setup > Quality of Service > General Settings > Queue. The Queue Page opens.

Figure 122:Queue Page

The Queue Page contains the following fields:

Strict Priority — Specifies whether traffic scheduling is based strictly on the queue priority.

WRR — Assigns WRR weights to queues. This field is enabled only for queues in WRR queue mode. If a queue is set to 0 weight, the queue is not operational and is effectively closed. Each queue has a weight range, queues 1-3 have the range 0-255, and queue 4 has the range 1-255.

2.Select Strict Priority or WRR Fields.

3.Click . The queue settings are set, and the device is updated.

Page 190

Page 191
Image 191
D-Link DES-3010FA/GA manual Defining Queue Settings