D-Link DES-3010FA/GA User Guide
The device reboots with no configuration and in 60 seconds starts sending BOOTP requests. The device receives the IP address automatically.
Note
When the device reboot begins, any input at the ASCII terminal or keyboard automatically cancels the BOOTP process before completion, and the device does not receive an IP address from the BOOTP server.
The following example illustrates the process:
console# enable
console# delete
You haven’t saved your changes. Are you sure you want to continue (y/n)[n]?
This command will reset the whole system and disconnect your current session.Do you want to continue (y/n)[n]?
******************************************************
/*the device reboots */
3.To verify the IP address, enter the show ip interface command. The device is now configured with an IP address.
Security Management and Password Configuration
System security is handled through the AAA (Authentication, Authorization, and Accounting) mechanism that manages user access rights, privileges, and management methods. AAA uses both local and remote user databases. Data encryption is handled through the SSH mechanism.
The system is delivered with the user name admin, and no default password configured; all user names and passwords are
The security passwords can be configured for the following services:
•Console
•Telnet
•SSH
•HTTP
•HTTPS
Note
When creating a user name, the default priority is 1, which allows access but not configuration rights. A priority of 15 must be set to enable full access and configuration rights to the device. Although user names can be assigned privilege level 15 without a password, it is recommended to always assign a password. If there is no specified password, privileged users can access the web interface with any password.
Page 40
