Configuring Device Security
Configuring Network Security
1.Click Advanced Setup > Network Security > Traffic Control > Port Security. The Port Security Page opens.
Figure 47: Port Security Page
The Port Security Page contains the following fields:
•Interface — The port or LAG name.
•Interface Status — Indicates the host status. The possible field values are:
–Unauthorized — Indicates that the port control is Force Unauthorized, the port link is down or the port control is Auto, but a client has not been authenticated via the port.
–Not in Auto Mode — Indicates that the port control is Forced Authorized, and clients have full port access.
–
•Learning Mode — Defines the locked port type. The Learning Mode field is enabled only if Locked is selected in the Set Port field.The possible field values are:
–Classic Lock — Locks the port using the classic lock mechanism. The port is immediately locked, regardless of the number of addresses that have already been learned.
–Limited Dynamic Lock — Locks the port by deleting the current dynamic MAC addresses associated with the port. The port learns up to the maximum addresses allowed on the port. Both relearning and aging MAC addresses are enabled.
•Max Entries — Specifies the number of MAC address that can be learned on the port. The Max Entries field is enabled only if Locked is selected in the Set Port field. In addition, the Limited Dynamic Lock mode is selected. The default is 1.
Page 93
