D-Link DES-3010FA/GA Defining Gvrp, Click Basic Setup Garp GVRP. The Gvrp Parameters Page opens

D-Link DES-3010FA/GA User Guide

Defining GVRP

GARP VLAN Registration Protocol (GVRP) is specifically provided for automatic distribution of VLAN membership information among VLAN-aware bridges. GVRP allows VLAN-aware bridges to automatically learn VLANs to bridge ports mapping, without having to individually configure each bridge and register VLAN membership. To define GARP. To define GVRP on the device:

1.Click Basic Setup > GARP > GVRP. The GVRP Parameters Page opens:

Figure 68: GVRP Parameters Page

The GVRP Parameters Page is divided into port and LAG parameters. The field definitions are the same. The GVRP Parameters Page contains the following fields:

•GVRP Global Status — Indicates if GVRP is enabled on the device. The possible field values are:

–Enable — Enables GVRP on the selected device.

–Disable — Disables GVRP on the selected device.

•Copy from Entry Number — Indicates the row number from which GARP parameters are copied.

•To Row Number — Indicates the row number to which GARP parameters are copied.

•Port— DIsplays the port on which GVRP is enabled. The possible field values are:

–Port — Indicates the port number on which GVRP is enabled.

–LAG — Indicates the LAG number on which GVRP is enabled.

•GVRP State— Indicates if GVRP is enabled on the port. The possible field values are:

–Enable — Enables GVRP on the selected port.

–Disable — Disables GVRP on the selected port.

Page 118