D-Link DES-3010FA/GA manual Console reload

D-Link DES-3010FA/GA User Guide

Problems	Possible Cause	Solution
Add and Edit pages do	A pop-up blocker is	Disable pop-up blockers.
not open.	enabled.
Lost password		The Password Recovery Procedure enables the user
		to override the current password configuration, and
		disables the need for a password to access the con-
		sole.
		The password recovery is effective until the device is
		reset. If the password/user name has been forgotten
		or lost. The password must be reconfigured using
		either the CLI commands or via the Embedded Web
		Interface.
		The Password Recovery Procedure is invoked from
		the Startup menu:
		1. Reboot the system either by disconnecting the
		power supply, or enter the command reboot, the
		following message is displayed:
		Console> reload
		Are you sure you want to reboot the
		system (y/n)[n]?
		2. Enter Y. The device reboots. After the POST,
		when the text “Autoboot in 2 seconds -
		press RETURN or Esc. to abort and
		enter prom.” is displayed, press <Enter>. The
		Startup Menu is displayed.
		[1] Download software
		[2] Erase flash file
		[3] Erase flash sectors
		[4] Password Recovery Procedure
		[5] Enter Diagnostic Mode
		[6] Back
		3. Enter 4 within 15 seconds after the bootup pro-
		cess from the StartUp menu. If the startup menu
		option is not selected within 15 seconds, the
		accessibility requirements are erased, and the
		system continues to load. The password is
		defined using the CLI mode.
		4. Enter the CLI configuration mode.
		5. Enter the password commands: username,
		enable password, or password [line].
		For example: enable password level 1
		password *****
		6. Enter the command exit. The CLI mode is
		exited.

Page 248