D-Link DES-3010FA/GA manual Configuring Rmon Events, Defining Rmon Events Control

D-Link DES-3010FA/GA User Guide

•Jabbers — Displays the total number of received packets that were longer than 1518 octets. This number excludes frame bits, but includes FCS octets that had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral octet (Alignment Error) number. The field range to detect jabbers is between 20 ms and 150 ms.

•Collisions — Displays the number of collisions received on the interface since the device was last refreshed.

•Utilization — Displays the percentage of the interface utilized.

2.Select an entry in the History Entry field. The Statistics are displayed.

Configuring RMON Events

This section includes the following topics:

•Defining RMON Events Control

•Viewing the RMON Events Logs

Defining RMON Events Control

The RMON Events Control Page contains fields for defining RMON events. To view RMON events:

•Click Advanced Setup > RMON > Events > Events Control. The RMON Events Control Page opens.

Figure 154:RMON Events Control Page

Page 240