
D-Link DES-3010FA/GA User Guide
Section 8. Aggregating Ports
Link Aggregation optimizes port usage by linking a group of ports together to form a single LAG (aggregated group). Aggregating ports multiplies the bandwidth between the devices, increases port flexibility, and provides link redundancy.
The device supports both static LAGs and Link Aggregation Control Protocol (LACP) LAGs. LACP LAGs negotiate aggregating ports’ links with other LACP ports located on a different device. If the other device ports are also LACP ports, the devices establish a LAG between them.
•Consider the following when aggregating ports:
•All ports within a LAG must be the same media type.
•A VLAN is not configured on the port.
•The port is not assigned to a different LAG.
•
•The port is in
•All ports in the LAG have the same ingress filtering and tagged modes.
•All ports in the LAG have the same back pressure and flow control modes.
•All ports in the LAG have the same priority.
•All ports in the LAG have the same transceiver type.
•The device supports up to eight LAGs, and eight ports in each LAG.
•Ports can be configured as LACP ports only if the ports are not part of a previously configured LAG.
•Ports added to a LAG lose their individual port configuration. When ports are removed from the LAG, the orig- inal port configuration is applied to the ports.
The device uses a hash function to determine which packets are carried on which
•Aggregating Ports
•Configuring LACP
Page 102