Configuring Device Security
Configuring Management Security
Defining RADIUS Settings
Remote Authorization
Default parameters are
To configure RADIUS servers:
1.Click System > Management Security > Authentication > RADIUS. The RADIUS Page opens:
Figure 34: RADIUS Page
The RADIUS Page contains the following fields:
•Retries — Defines the number of transmitted requests sent to the RADIUS server before a failure occurs. Possible field values are
•Timeout for Reply — Defines the amount of time (in seconds) the device waits for an answer from the RADIUS server before retrying the query, or switching to the next server. Possible field values are
•Dead Time — Defines the default amount of time (in minutes) that a RADIUS server is bypassed for service requests. The range is
•Key String — Defines the default key string used for authenticating and encrypting all
•Source IP Address — Defines the default IP address of a device accessing the RADIUS server.
The RADIUS Page also contains the following fields:
Page 75
