D-Link DES-3010FA/GA User Guide
Defining Default Gateways
Packets are forwarded to the default IP when frames are sent to a remote network via the default gateway. The configured IP address must belong to the same subnet of one of the IP interfaces. To define a default gateway:
1.Click Basic Setup > IP Configuration > IP Addressing > Default Gateway. The Default Gateway Page opens:
Figure 73: Default Gateway Page
The Default Gateway Page contains the following fields:
•User Defined Default Gateway — Defines the default gateway IP address.
•Active Default Gateway — Indicates if the default gateway is active. The possible field values are:
–Checked — Activates the default gateway.
–Unchecked — Maintains the default gateway as inactive. This is the default value.
•Remove — Removes the default gateway. The possible field values are:
–Checked — Removes the selected default gateway.
–Unchecked — Maintains the default gateway.
2.Select an IP address in the User Defined Default Gateway field.
3.Select the Active Default Gateway check box.
4.Click 
. The device’s default gateway is defined, and the device is updated.
Page 124
