D-Link DES-3010FA/GA manual Configuring Multiple Hosts

Configuring Device Security

Configuring Network Security

Configuring Multiple Hosts

The Multiple Host Page allows network managers to configure advanced port-based authentication settings for specific ports and VLANs. For more information on advanced port-based authentication, see “Advanced Port- Based Authentication” on page 83. To define the network authentication global properties:

1.Click Advanced Setup > Network Security > Authentication > Multiple Host. The Multiple Host Page opens.

Figure 44: Multiple Host Page

The Multiple Host Page contains the following fields:

•Port — Displays the port number for which advanced port-based authentication is enabled.

•Multiple Hosts — Indicates whether multiple hosts are enabled. Multiple hosts must be enabled in order to either disable the ingress-filter, or to use port-lock security on the selected port. The possible field values are:

–Multiple — Multiple hosts are enabled.

–Disable— Multiple hosts are disabled.

•Action on Violation — Defines the action to be applied to packets arriving in single-host mode, from a host whose MAC address is not the supplicant MAC address. The possible field values are:

–Forward — Forwards the packet.

–Discard — Discards the packets. This is the default value.

–Shutdown — Discards the packets and shuts down the port. The ports remains shut down until reactivated, or until the device is reset.

Page 89