![](/images/new-backgrounds/1269303/269303225x1.webp)
D-Link DES-3010FA/GA User Guide
–PV - Promiscuous — Indicates the port is part of a PV Promiscuous VLAN.
–PV - Isolated — Indicates the port is part of a PV Isolated VLAN.
–PV - Community — Indicates the port is part of a PV Community VLAN.
•Dynamic — Assigns a port to a VLAN based on the host source MAC address connected to the port.
•PVID — Assigns a VLAN ID to untagged packets. The possible values are
•Frame Type — Specifies the packet type accepted on the port. The possible field values are:
–Admit Tag Only — Only tagged packets are accepted on the port.
–Admit All — Both tagged and untagged packets are accepted on the port.
•Ingress Filtering— Indicates whether ingress filtering is enabled on the port. The possible field values are:
–Enable — Enables ingress filtering on the device. Ingress filtering discards packets that are defined to VLANs of which the specific port is not a member.
–Disable — Disables ingress filtering on the device.
•Reserve VLAN — Indicates the VLAN selected by the user to be the reserved VLAN if not in use by the sys- tem.
2.Select a port.
3.Click
. The VLAN Interface Settings Page opens:
Figure 63: VLAN Interface Settings Page
4.Define the Interface, Port VLAN Mode, Dynamic, PVID, Frame Type, Ingress Filtering, and Reserve VLAN for Internal Use fields.
5.Click . The VLAN interface settings are modified, and the device is updated.
Page 112