Output setting, Setup menu | Furuno GP32 specification

Output setting

1.Press the [MENU] key once or twice to open the menu.

2.Choose I/O SETUP.

3.Press the [ENT] key.

I/O SETUP


DATA1	:	NMEA-REM1
DATA2	:	NMEA-REM
NMEA VER : VER2.0
SAVE WPT/RTE →			PC?
LOAD WPT/RTE ←			PC?
LOAD WPT←	YEOMAN?

WIRING INFO?

I/O SETUP menu

4.Choose DATA1, DATA2 or NMEA VER as appropriate.

5.Press the [ENT] key. One of the following screens appears depending on the item selected at step 4.

NMEA-REM1		NMEA-REM		VER 1.5
NMEA-REM2		NMEA-AP		VER 2.0
NMEA-AP		RTCM-OUT*		VER 2.1
For DATA1		For DATA2		For NMEA
				Version

*= For GP-37, fixed at "BEACON" when MODE on DGPS/WAAS menu is set to EXT BEACON.

DATA1, DATA 2 and NMEA version options

9. INSTALLATION

6.Use ▲ or ▼ to choose desired option. NMEA-REM1, 2: Output data to radar, echo sounder, etc.

NMEA-AP:Output data to an autopilot.

RTCM-OUT:Choose when equipped with internal DGPS beacon receiver (GP-37). VER 1.5, 2.0, 2.1: Choose the NMEA version of external equipment. If you are unsure of the version number, try both and choose the one which successfully outputs data.

7.Press the [ENT] key.

8.Press the [MENU] key twice to finish.

57

Image 67

Furuno GP32 manual Output setting, Setup menu, DATA1, Data 2 and Nmea version options

Contents

Page 00080928811 Safety Instructions Safety Instructions for the Installer Table of Contents Outline Drawings Foreword FeaturesWord to the Owner of the GP-37, GP-32 GP-37 system configuration System ConfigurationGP-32 system configuration Msas Egnos Waas What is WAAS? Name Type Code No Qty Remarks Equipment ListsStandard supply Optional equipment Control panel How to attach and remove the hard coverOperational Overview Controls Turning off the power Turning On and Off PowerAdjusting Brilliance and Contrast Turning on the power Display Modes Display modes default user displays Highway display Plotter displayHighway display Plotter display Nav data display Steering displayNav data display Steering display Speedometer display Digital display default displayUser displays Digital display Auto How to enter alphanumeric dataMenu Overview OFF Simulator menu Simulation DisplaySimulator display, auto course selected Cursor state and data Plotter Display OverviewChoosing the Display Range Shifting the Cursor OFF Shifting the DisplayCentering Own Ship’s Position Changing Track Plotting Interval, Stopping Plotting YES Erasing TrackErase menu Erase Track Plotter Display Overview This page intentionally left blank Entering Waypoints Waypoints MarksEntering a waypoint with the cursor GPS POS. → Mark Entering a waypoint at own ship positionEntering a waypoint from the waypoint list WPTS/MARKS List Saved to MOB GO to MOB ? Entering the MOB MarkEnter a NEW WPT Name Mark Editing waypoints Displaying Waypoint NameOperations on the Waypoint List DSP RTE DSP ALL Name Kobe Erasing WaypointsShowing nearest waypoints by distance, TTG and ETA WPTS/MARKS Nearest Speed for Calculating Time-to-Go, Estimated Time of Arrival Sample route RoutesCreating Routes Creating a route with the cursor Creating a route from the route menu Routes Routes Creating a route from the waypoint listWPTS/MARKS List Distance Creating a track-based routeCreating a track-based route manually Creating a track-based route automatically Name Editing RoutesReplacing waypoints in a route REMOVE? INSERT? SKIP? Temporarily deselecting a waypoint in a route Route contents Route-01Permanently deleting a waypoint from a route Inserting a waypoint in a route YES Erasing RoutesChanging route comment name Erase Route 01 ? This page intentionally left blank Destination Setting Destination by CursorSetting Destination by Waypoint WPT-NEAR? OFF?? ROUTE? CURSOR? SETUP? REVERSE? Setting Route as DestinationSetting User Waypoint as Destination Canceling Destination Alarms AlarmsArrival Alarm, Anchor Watch Alarm Arrival alarm Anchor watch alarm XTE Cross Track Error AlarmARV ANC WAAS/DGPS mode and alarm message Speed AlarmWAAS/DGPS Alarm Time Alarm Long Constant Trip AlarmOdometer Alarm Buzzer Type Selection Route Other FunctionsCalculating Range, Bearing, TTG and ETA Range and bearing between two waypoints EXT Beacon Waas SetupGPS Waas INT Beacon GPS Dgps setup Station User Programming Dgps user channels stationsEditing Dgps user channels Station Nearest Erasing individual user channels Bearing ReferenceErasing all user channels True Magnetic Variation Geodetic Chart SystemUnits of Measurement For Decca TD Time Difference using local time, Time FormatPosition Display Format For Loran C TD GPS Setup menu description GPS Setup Digital data User Display SetupSpeedometer Speedometer display Resetting Trip and Odometer DistancesReset Trip METER? Are YOU SURE? YES no ODOMETER? Reset trip meter, odometer options Downloading/Uploading between PC and GP-37/GP-32 WiringSetting for communication software on Uploading, Downloading Waypoint, Route Data Loading data from a Yeoman Uploading data from a PC Route data format Waypoint data format Espanol LanguageRoute comment data format End of sentence Messages Maintenance & TroubleshootingMaintenance Displaying the Message Board Replacing the Fuse Replacing the BatteryExchange BATTERY? Ready for Battery Change Press ANY KEY To Shut Down Test START? prompt DiagnosticsSatellite Monitor Display Satellite monitor display Clearing Data Language Default Position Unit Time Difference Language and default position, unit and time difference This page intentionally left blank Desktop and overhead mounting InstallationInstallation of Display Unit Mounting considerations Flush mount S kit Type OP20-17 Code No Installation of Antenna UnitHow to assemble the connector Flush mount S kit Grounding WiringWiring How to fix spring in fuse holder DATA2 RS-232C level Initial SettingsOutput data format, data sentences DATA1 Current loop data Setup menu Output settingDATA1, Data 2 and Nmea version options This page intentionally left blank Menu Tree Appendix Interval 01 to 99 Digital Display divisionAvailable data Odometer, trip , time Start from -99 to +99 North American Geodetic Chart List GRI Loran C Chains Chain Location Code Decca Chains AP-6 Specifications GPS Navigator GP-32 Dgps Navigator GP-37 Power Supply CT4UWOK Feb Hatai Page Page Page GPS Navigator Dgps Navigator WAAS/DGPS XTE Index Index-2