7.OTHER FUNCTIONS
d)Use the cursor pad to enter the transmission frequency of the DGPS beacon station to be used and then press the [ENT] key.
LIST
a)The following display appears after pressing the [ENT] key at step 6.
STATION (NEAREST)
| [EXIT] | [USER] | 92° |
|
| ||||
| 310.0 |
| 29.1 nm |
|
| ||||
287.0 |
| 56.7 nm | 134° |
|
| ||||
292.0 |
| 160 nm | 320° |
|
| ||||
321.0 |
| 234 nm | 134° |
|
| ||||
302.0 |
| 426 nm | 121° * |
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Tx frequency of |
| "*" denotes | |||||||
beacon station |
| user channel. | |||||||
|
|
|
|
|
|
|
|
|
|
Range (ref. only) and bearing from ship to beacon station
DGPS beacon station list
b)Use the cursor pad to choose station desired.
c)Press the [ENT] key.
8.Press the [MENU] key twice to finish.
Programming DGPS user channels (stations)
The user may program 20 DGPS beacon stations from which to use in DGPS beacon station selection. Whenever a new station is constructed you can add it to the list.
1.Press the [MENU] key twice to open the menu.
2.Choose DGPS/WAAS and then press the [ENT] key.
3.Choose DGPS STATION and then press the [ENT] key.
4.Choose LIST and then press the [ENT] key.
5.Choose USER and then press the [ENT] key.
STATION (USER) 
[EXIT] [NEW?] [CLR?]
01 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
02 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
03 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
04 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
05 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
06 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
DGPS STATION (USER) list
6.Choose “NEW?” and then press the [ENT] key.
NEW USER CHANNEL
STATION (USER) 
FREQ | : |
| 310.0kHz |
|
RATE | : |
| 200BPS | |
LAT | : |
| 37° 59'N | |
LON | : |
| 123° 00'W | |
EXIT? | SAVE? |
|
| |
NEW USER CHANNEL (DGPS) set up menu
7.Press the [ENT] key, enter frequency of the station, and then press the [ENT] key.
8.Press the [ENT] key, enter baud rate of the station, and then press the [ENT] key.
9.Press the [ENT] key, enter latitude of the
station, and then press the [ENT] key.
10 Press the [ENT] key, enter longitude of the station, and then press the [ENT] key.
11.Choose “SAVE?” and then press the [ENT] key.
12.Press the [MENU] key twice to finish.
Editing DGPS user channels
1.Press the [MENU] key twice to open the menu.
2.Choose WAAS/DGPS and then press the [ENT] key.
3.Choose DGPS STATION and then press the [ENT] key.
4.Choose LIST and then press the [ENT] key.
5.Choose USER and then press the [ENT] key.
36
