Furuno GP32 manual User Display Setup, Digital data, Speedometer

DISABLE GEO

Like GPS satellites, the GPS receiver automatically eliminates any malfunctioning WAAS satellite. To disable a WAAS satellite manually, enter three-digit satellite number with the cursor pad and then press the [ENT] key. To restore a satellite, enter “000”.

FIX MODE

Chooses position fixing method; 2D or 2/3D. 2D requires three satellites in view of the GPS receiver; 2/3D requires three or four satellites in view of the GPS receiver, whichever is available. When the 2D mode is selected, enter the antenna height above the waterline, to obtain accurate position data. The default setting is 5 m.

7.11 User Display Setup

The user displays, which appear when the [DISP] key is pressed several times, provide user-customized digital data and a speedometer.

Digital data

The user may choose 1-4 items of navigation data to display on the digital display.

1.Press the [MENU] key once or twice to open the menu.

2.Choose USER DISP and then press the [ENT] key.

USER DISPLAY

1: DIGITAL

2: SPEEDOMETER

USER DISPLAY menu

7.OTHER FUNCTIONS

3.Choose 1 or 2 and then press the [ENT] key.

OFF

DIGITAL

SPEEDOMETER

User display type options

4.Choose DIGITAL and then press the [ENT] key.

5.The cursor is selecting the square at the right side of the screen. Press the [ENT] key.

: 1 indication

: 2 indications

: 3 indications : 4 indications

User display screen division options

6.Choose the screen division desired, that is, the number of data to display, and then press the [ENT] key. The display now looks something like the one shown below.

USER DISPLAY

A:	POWER
		A C *
B: TRIP
C: SOG		B D

D:COG

*= Changes according to selection at step 6.

A	A	A
	B	B	C

USER DISPLAY menu,

default digital display settings

7. “A” is selected. Press the [ENT] key.

NONE ODO TRIP

TIME POSN POWER

SOG COG WPT

XTE TTG ETA

Digital data options

41