Bearing Reference, Erasing all user channels, True | Furuno GP32

6.Choose a station from the list and then press the [ENT] key. The display looks something like the one below.

FREQ	:	310.0kHz
RATE	:	200BPS
LAT	:	37° 59'N
LON	:	123° 00'W
EXIT?	SAVE?	ERASE?

Screen for entering DGPS station data

7.Choose item, press the [ENT] key, edit data, and then press the [ENT] key.

8.Choose “SAVE?” and then press the [ENT] key.

9.Press the [MENU] key twice to finish.

7. OTHER FUNCTIONS

Erasing individual user channels

1.Press the [MENU] key twice to open the menu.

2.Choose DGPS/WAAS and then press the [ENT] key.

3.Choose DGPS STATION and then press the [ENT] key.

4.Choose LIST and then press the [ENT] key.

5.Choose USER and then press the [ENT] key.

6.Choose a channel from the list and then press the [ENT] key.

7.Choose “ERASE?”.

8.Choose YES and then press the [ENT] key.

9.Press the [MENU] key twice to finish.

Erasing all user channels

1.Press the [MENU] key twice to open the menu.

2.Choose DGPS/WAAS and then press the [ENT] key.

3.Choose DGPS STATION and then press the [ENT] key.

4.Choose LIST and then press the [ENT] key.

5.Choose USER and then press the [ENT] key.

6.Choose “CLR?” and then press the [ENT] key. The following message appears.

ERASE ALL ?

ARE YOU SURE ?

YES	NO

DGPS channel erase options

7.Press ◄ to choose YES and then press the [ENT] key.

8.Press the [MENU] key twice to finish.

7.4 Bearing Reference

Ship's course and bearing to a waypoint may be displayed in true or magnetic bearing. Magnetic bearing is true bearing plus (or minus) earth’s magnetic deviation. Use the bearing reference in accordance with the compass interfaced: magnetic for magnetic compass, true for gyrocompass. The default setting displays magnetic bearings.

1.Press the [MENU] key once or twice to open the menu.

2.Choose PLOTTER.

3.Press the [ENT] key.

4.Choose BRG. REF.

5.Press the [ENT] key.

MAG

TRUE

Bearing reference options

6.Choose MAG or TRUE as appropriate.

7.Press the [ENT] key.

8.Press the [MENU] key twice to finish.

37

Image 47

Furuno GP32 manual Bearing Reference, Erasing all user channels, True, Erasing individual user channels, Erase ALL ?

Contents

Page 00080928811 Safety Instructions Safety Instructions for the Installer Table of Contents Outline Drawings Word to the Owner of the GP-37, GP-32 FeaturesForeword GP-32 system configuration System ConfigurationGP-37 system configuration Msas Egnos Waas What is WAAS? Name Type Code No Qty Remarks Equipment ListsStandard supply Optional equipment Control panel How to attach and remove the hard coverOperational Overview Controls Turning off the power Turning On and Off PowerAdjusting Brilliance and Contrast Turning on the power Display Modes Display modes default user displays Highway display Plotter displayHighway display Plotter display Nav data display Steering displayNav data display Steering display Speedometer display Digital display default displayUser displays Digital display Auto How to enter alphanumeric dataMenu Overview OFF Simulator display, auto course selected Simulation DisplaySimulator menu Cursor state and data Plotter Display OverviewChoosing the Display Range Shifting the Cursor OFF Shifting the DisplayCentering Own Ship’s Position Changing Track Plotting Interval, Stopping Plotting YES Erasing TrackErase menu Erase Track Plotter Display Overview This page intentionally left blank Entering a waypoint with the cursor Waypoints MarksEntering Waypoints GPS POS. → Mark Entering a waypoint at own ship positionEntering a waypoint from the waypoint list WPTS/MARKS List Saved to MOB GO to MOB ? Entering the MOB MarkEnter a NEW WPT Name Mark Editing waypoints Displaying Waypoint NameOperations on the Waypoint List DSP RTE DSP ALL Name Kobe Erasing WaypointsShowing nearest waypoints by distance, TTG and ETA WPTS/MARKS Nearest Speed for Calculating Time-to-Go, Estimated Time of Arrival Sample route RoutesCreating Routes Creating a route with the cursor Creating a route from the route menu Routes WPTS/MARKS List Creating a route from the waypoint listRoutes Distance Creating a track-based routeCreating a track-based route manually Creating a track-based route automatically Name Editing RoutesReplacing waypoints in a route REMOVE? INSERT? SKIP? Temporarily deselecting a waypoint in a route Route contents Route-01Permanently deleting a waypoint from a route Inserting a waypoint in a route YES Erasing RoutesChanging route comment name Erase Route 01 ? This page intentionally left blank Destination Setting Destination by CursorSetting Destination by Waypoint WPT-NEAR? OFF?? ROUTE? CURSOR? SETUP? REVERSE? Setting Route as DestinationSetting User Waypoint as Destination Canceling Destination Alarms AlarmsArrival Alarm, Anchor Watch Alarm Arrival alarm ARV ANC XTE Cross Track Error AlarmAnchor watch alarm WAAS/DGPS mode and alarm message Speed AlarmWAAS/DGPS Alarm Time Alarm Long Constant Trip AlarmOdometer Alarm Buzzer Type Selection Route Other FunctionsCalculating Range, Bearing, TTG and ETA Range and bearing between two waypoints EXT Beacon Waas SetupGPS Waas INT Beacon GPS Dgps setup Station User Programming Dgps user channels stationsEditing Dgps user channels Station Nearest Erasing individual user channels Bearing ReferenceErasing all user channels True Units of Measurement Geodetic Chart SystemMagnetic Variation For Decca TD Time Difference using local time, Time FormatPosition Display Format For Loran C TD GPS Setup menu description GPS Setup Speedometer User Display SetupDigital data Speedometer display Resetting Trip and Odometer DistancesReset Trip METER? Are YOU SURE? YES no ODOMETER? Reset trip meter, odometer options Downloading/Uploading between PC and GP-37/GP-32 WiringSetting for communication software on Uploading, Downloading Waypoint, Route Data Loading data from a Yeoman Uploading data from a PC Route data format Waypoint data format Espanol LanguageRoute comment data format End of sentence Messages Maintenance & TroubleshootingMaintenance Displaying the Message Board Replacing the Fuse Replacing the BatteryExchange BATTERY? Ready for Battery Change Press ANY KEY To Shut Down Test START? prompt DiagnosticsSatellite Monitor Display Satellite monitor display Clearing Data Language Default Position Unit Time Difference Language and default position, unit and time difference This page intentionally left blank Desktop and overhead mounting InstallationInstallation of Display Unit Mounting considerations Flush mount S kit Type OP20-17 Code No Installation of Antenna UnitHow to assemble the connector Flush mount S kit Grounding WiringWiring How to fix spring in fuse holder DATA2 RS-232C level Initial SettingsOutput data format, data sentences DATA1 Current loop data DATA1, Data 2 and Nmea version options Output settingSetup menu This page intentionally left blank Menu Tree Appendix Interval 01 to 99 Digital Display divisionAvailable data Odometer, trip , time Start from -99 to +99 North American Geodetic Chart List GRI Loran C Chains Chain Location Code Decca Chains AP-6 Specifications GPS Navigator GP-32 Dgps Navigator GP-37 Power Supply CT4UWOK Feb Hatai Page Page Page GPS Navigator Dgps Navigator WAAS/DGPS XTE Index Index-2