Trip Alarm, Odometer Alarm, Buzzer Type Selection | Furuno GP32

6. ALARMS

6.6 Trip Alarm

This alarm alerts you by aural and visual alarms when your boat has traveled a distance greater than the trip alarm distance.

1.Press the [MENU] key once or twice to open the menu.

2.Choose ALARMS.

3.Press the [ENT] key.

4.Choose TRIP and then press the [ENT] key.

5.Choose ON and then press the [ENT] key.

6.Press the [ENT] key. Enter distance desired (001-999 nm) with the cursor pad.

7.Press the [ENT] key.

8.Press the [MENU] key twice to finish.

When the boat has traveled further than the preset trip distance, the buzzer sounds and the message TRIP ALARM! and the alarm icon appear.

6.7 Odometer Alarm

This alarm alerts you by aural and visual alarms when your boat has traveled the total distance you set.

1.Press the [MENU] key once or twice to open the menu.

2.Choose ALARMS.

3.Press the [ENT] key.

4.Choose ODOMETER and then press the [ENT] key.

5.Choose ON and then press the [ENT] key.

6.Press the [ENT] key. Enter distance desired (001-999 nm) with the cursor pad.

7.Press the [ENT] key.

8.Press the [MENU] key twice to finish.

When the boat has traveled further than the preset trip distance, the buzzer sounds and the message ODOMETER ALARM! and the alarm icon appear.

6.8 Buzzer Type Selection

The buzzer sounds whenever an alarm setting is violated. You can choose the type of buzzer to use as follows:

1.Press the [MENU] key once or twice to open the menu.

2.Choose ALARMS.

3.Press the [ENT] key.

4.Choose BUZZER and then press the [ENT] key.

SHORT

LONG

CONSTANT

Buzzer sound options

5.Choose buzzer type desired and then press the [ENT] key.

SHORT: Two short beeps

LONG: Three long beeps

CONSTANT: Continuous beeps

6.Press the [MENU] key twice to finish.

32

Image 42

Furuno GP32 manual Trip Alarm, Odometer Alarm, Buzzer Type Selection, Long Constant, Buzzer sound options

Contents

Page 00080928811 Safety Instructions Safety Instructions for the Installer Table of Contents Outline Drawings Features ForewordWord to the Owner of the GP-37, GP-32 System Configuration GP-37 system configurationGP-32 system configuration What is WAAS? Msas Egnos Waas Optional equipment Equipment ListsStandard supply Name Type Code No Qty Remarks Controls How to attach and remove the hard coverOperational Overview Control panel Turning on the power Turning On and Off PowerAdjusting Brilliance and Contrast Turning off the power Display modes default user displays Display Modes Plotter display Plotter displayHighway display Highway display Steering display Steering displayNav data display Nav data display Digital display Digital display default displayUser displays Speedometer display OFF How to enter alphanumeric dataMenu Overview Auto Simulation Display Simulator menuSimulator display, auto course selected Shifting the Cursor Plotter Display OverviewChoosing the Display Range Cursor state and data Changing Track Plotting Interval, Stopping Plotting Shifting the DisplayCentering Own Ship’s Position OFF Erase Track Erasing TrackErase menu YES Plotter Display Overview This page intentionally left blank Waypoints Marks Entering WaypointsEntering a waypoint with the cursor WPTS/MARKS List Entering a waypoint at own ship positionEntering a waypoint from the waypoint list GPS POS. → Mark Mark Entering the MOB MarkEnter a NEW WPT Name Saved to MOB GO to MOB ? DSP RTE DSP ALL Displaying Waypoint NameOperations on the Waypoint List Editing waypoints WPTS/MARKS Nearest Erasing WaypointsShowing nearest waypoints by distance, TTG and ETA Name Kobe Speed for Calculating Time-to-Go, Estimated Time of Arrival Creating a route with the cursor RoutesCreating Routes Sample route Routes Creating a route from the route menu Creating a route from the waypoint list RoutesWPTS/MARKS List Creating a track-based route automatically Creating a track-based routeCreating a track-based route manually Distance REMOVE? INSERT? SKIP? Editing RoutesReplacing waypoints in a route Name Inserting a waypoint in a route Route contents Route-01Permanently deleting a waypoint from a route Temporarily deselecting a waypoint in a route Erase Route 01 ? Erasing RoutesChanging route comment name YES This page intentionally left blank WPT-NEAR? OFF?? ROUTE? CURSOR? SETUP? Setting Destination by CursorSetting Destination by Waypoint Destination Canceling Destination Setting Route as DestinationSetting User Waypoint as Destination REVERSE? Arrival alarm AlarmsArrival Alarm, Anchor Watch Alarm Alarms XTE Cross Track Error Alarm Anchor watch alarmARV ANC Time Alarm Speed AlarmWAAS/DGPS Alarm WAAS/DGPS mode and alarm message Buzzer Type Selection Trip AlarmOdometer Alarm Long Constant Range and bearing between two waypoints Other FunctionsCalculating Range, Bearing, TTG and ETA Route Waas INT Beacon Waas SetupGPS EXT Beacon Dgps setup GPS Station Nearest Programming Dgps user channels stationsEditing Dgps user channels Station User True Bearing ReferenceErasing all user channels Erasing individual user channels Geodetic Chart System Magnetic VariationUnits of Measurement For Loran C TD Time Difference using local time, Time FormatPosition Display Format For Decca TD GPS Setup GPS Setup menu description User Display Setup Digital dataSpeedometer Reset trip meter, odometer options Resetting Trip and Odometer DistancesReset Trip METER? Are YOU SURE? YES no ODOMETER? Speedometer display Uploading, Downloading Waypoint, Route Data WiringSetting for communication software on Downloading/Uploading between PC and GP-37/GP-32 Uploading data from a PC Loading data from a Yeoman Waypoint data format Route data format End of sentence LanguageRoute comment data format Espanol Displaying the Message Board Maintenance & TroubleshootingMaintenance Messages Ready for Battery Change Press ANY KEY To Shut Down Replacing the BatteryExchange BATTERY? Replacing the Fuse Satellite monitor display DiagnosticsSatellite Monitor Display Test START? prompt Clearing Data Language and default position, unit and time difference Language Default Position Unit Time Difference This page intentionally left blank Mounting considerations InstallationInstallation of Display Unit Desktop and overhead mounting Flush mount S kit Installation of Antenna UnitHow to assemble the connector Flush mount S kit Type OP20-17 Code No How to fix spring in fuse holder WiringWiring Grounding DATA1 Current loop data Initial SettingsOutput data format, data sentences DATA2 RS-232C level Output setting Setup menuDATA1, Data 2 and Nmea version options This page intentionally left blank Appendix Menu Tree Start from -99 to +99 Digital Display divisionAvailable data Odometer, trip , time Interval 01 to 99 Geodetic Chart List North American Loran C Chains GRI Decca Chains Chain Location Code AP-6 Specifications GPS Navigator GP-32 Dgps Navigator GP-37 Power Supply CT4UWOK Feb Hatai Page Page Page GPS Navigator Dgps Navigator Index WAAS/DGPS XTE Index-2