Furuno GP32 manual Creating a route from the waypoint list, Routes, WPTS/MARKS List

NAME: 008

34° 39.836'N	MARK
135° 12.059'E	x
10-JAN-02	11:25D

TTG 02H00M ETA: 12:25

Exit?

Waypoint attribute edit window

8.“CMNT” shows the name of the route: the names of the first and last waypoints in the route. If you want to change the name, press ▲ to choose CMNT, press the [ENT] key, enter route name with the cursor pad and then press the [ENT] key.

9.Choose “Exit?” at the top of the screen.

10.Press the [ENT] key to register the route, under the next sequential route number. Then, the ROUTES list shows the name of the first and last waypoints used, next to route number.

ROUTES

VOYAGE ROUTE:			STOP
INTERVAL: TIME			00H10M
NO	[NEW?]
LOG	EMPTY ROUTE
01	001 →	003
02	KOBE →	OSAKA
_ _	_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

ROUTES list

11. Press the [MENU] key twice to finish.

Creating a route from the waypoint list

1.Press the [MENU] key once or twice to display the menu.

2.Choose WAYPOINTS and then press the [ENT] key.

3.Choose LIST or NEAREST and then press the [ENT] key.

WPTS/MARKS (LIST)

[NEW?]	001	002
003	CURSOR	MOB
START	_ _ _ _ _ _	_ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _		_ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _		_ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _		_ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _		_ _ _ _ _ _

WPTS/MARKS (list)

4. ROUTES

4.Choose a waypoint and then press the [ENT] key. Your screen should look something like the one below.

NAME: 001
34° 39.836'N	MARK
135° 12.059'E	x
10-JAN-02	10:25D

TTG 02H00M ETA: 12.25

Exit? LOG RTE?

Waypoint attribute edit window

5.Choose “LOG RTE?” and then press the [ENT] key.

6.Repeat steps 4 and 5 to complete the route.

7.Press the [MENU] key once.

8.Choose ROUTES and then press the [ENT] key. Your screen should now look something like the one shown below.

ROUTES

VOYAGE ROUTE:			STOP
INTERVAL: TIME			00H10M
NO	[NEW?]
LOG	004→	006
01	001→	003
02	KOBE → OSAKA
_ _	_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

ROUTES list

9.Choose LOG and then press the [ENT] key.

EDIT?

MOVE?

Route processing options

10.“MOVE?” is selected; press the [ENT] key. The route is moved from LOG and assigned the next sequential route number.

11.Press the [MENU] key twice to finish.

21