Furuno GP32 manual Resetting Trip and Odometer Distances, Speedometer display, Speedometer menu

7.OTHER FUNCTIONS

8.Use the cursor pad to choose data desired and then press the [ENT] key. NONE: No display

ODO:	Odometer distance
TRIP:	Trip distance
TIME:	Time and date
POSN:	Position
POWER:	Power source voltage
SOG:	Speed over ground
COG:	Course over ground
WPT:	Rng and brg to waypoint
XTE:	Cross-track error
TTG:	Time to go (to destination)
ETA:	Estimated time of arrival
	(at destination)

9.Control returns to the User display setup, with “B” selected. Depending on the selection made at step 5, set other indications similar to how you did with “A”.

10.Press the [MENU] key twice to finish.

Speedometer display

1.Press the [MENU] key once or twice to open the menu.

2.Choose USER DISP and then press the [ENT] key.

3.Choose 1 or 2 and then press the [ENT] key.

4.Choose SPEEDOMETER and then press the [ENT] key.

SPEEDOMETER

START FROM: + 0

INTERVAL : 10

0 10 20 30 40

Start point Interval

Speedometer menu

5.The cursor is selecting START FROM. Press the [ENT] key.

6.Enter starting speed: Use ◄ or ► to select location and ▲ or ▼ to enter value and switch from plus to minus and vice versa. The setting range is -99 to +99.

7.Press the [ENT] key, and the cursor shifts to INTERVAL.

8.Press the [ENT] key.

9.Enter scale interval: Use ◄ or ► to choose location and ▲ or ▼ to enter value. The setting range is 1 to 99.

10.Press the [ENT] key.

11.Press the [MENU] key twice to close the menu.

7.12Resetting Trip and Odometer Distances

1.Press the [MENU] key once or twice to open the menu.

2.Choose ERASE and then press the [ENT] key.

3.Choose “RESET TRIP?” (or “RESET ODO?”) and then press the [ENT] key. One of following displays appears.

RESET

TRIP METER?

ARE YOU SURE?

YES NO

RESET

ODOMETER?

ARE YOU SURE?

YES NO

Reset trip meter, odometer options

4.Press ◄ to choose YES and then press the [ENT] key to reset distance to zero.

5.Press the [MENU] key twice to finish.

42