Furuno GP32 manual Installation of Display Unit, Mounting considerations, Flush mounting

9. INSTALLATION

9.1 Installation of Display Unit

Mounting considerations

The display unit can be installed on a desktop, on the overhead, or in a panel (optional flush mounting kit required). Refer to the outline drawings at the end of this manual for installation instructions. When choosing a mounting location, keep in mind the following points:

•Locate the unit away from exhaust pipes and vents.

•The mounting location should be well ventilated.

•Mount the unit where shock and vibration are minimal.

•Locate the unit away from equipment which generates electromagnetic fields such as a motor or generator.

•Allow sufficient maintenance space at the sides and rear of the unit and leave sufficient slack in cables, to facilitate maintenance and servicing.

•Observe compass safe noted on page ii to prevent interference to a magnetic compass.

Desktop and overhead mounting

DesktopOverhead

Desktop and overhead mounting methods

Flush mounting

There are two types of flush mounting kits. For details, see the outline drawings at the end of this manual.

Flush mount F kit

Flush mount F kit

Type: OP20-29 Code No. 000-041-405

Name	Type	Code No.	Qty
Cosmetic	20-016-	100-251-370	1
panel	1051
Tapping	5X20	000-802-840	4
screw	SUS304
Hexagon-	M6X12	000-862-127	2
head bolt	SUS304
Spring	M6	000-864-260	2
washer	SUS304

1.Using the template (supplied), cut out a hole 92(H)X183(W) in the mounting location.

2.Fasten the cosmetic panel to the display unit with hexagon-head bolts and spring washers.

3.Set the display unit to the mounting location and fix it with tapping screws.

53