Furuno GP32 manual Setting Destination by Cursor, Setting Destination by Waypoint

5. DESTINATION

Destination can be set four ways: by cursor, by waypoint, by route, and by MOB position. Previous destination is cancelled whenever a destination is newly set.

A dashed line connects own ship and the destination, which is marked with “CURSOR” and an “X,” as shown in the illustration below.

CURSOR

x

5.1Setting Destination by Cursor

1.Press the [GOTO] key to display the GOTO options window.

GOTO

WPT-LIST?_ _ _ _ _ _ ?

WPT-NEAR? OFF??

ROUTE?

CURSOR? SETUP?

GOTO options

2.Choose “CURSOR?.”

3.Press the [ENT] key. The plotter display appears, with “?” shown to the right of the cursor.

Cursor appears with "?".

2D
[ 40 mn ]	?

+GOTO?

BRG: +

72°

RNG: +

54.5mn

34° 44.000N 135° 21.000E

Cursor appearance

when setting destination by cursor

4.Use the cursor pad to place the cursor on the location desired for destination.

5.Press the [ENT] key.

Destination set by cursor

5.2Setting Destination by Waypoint

1.Press the [GOTO] key.

2.Choose “WPT-LIST?” or “WPT-NEAR?”.

3.Press the [ENT] key. The SELECT GOTO WPT list appears.

SELECT GOTO WPT

[NEW?]	001	002
003	004	005
006	007	008
CURSOR	KOBE	MOB
OSAKA	START	_ _ _ _ _ _

_ _ _ _ _ _	_ _ _ _ _ _	_ _ _ _ _ _
_ _ _ _ _ _	_ _ _ _ _ _	_ _ _ _ _ _

WPT-LIST

SELECT GOTO WPT

START	: 2.97 nm	68°
OSAKA	: 1.90 nm	335°
006	: 3.53 nm	15°
005	: 4.79 nm	11°
004	: 4.86 nm	15°
008	: 5.21 nm	345°
CURSOR	: 6.41 nm	356°

WPT-NEAR

SELECT GOTO WPT screens

4.Choose a waypoint.

5.Press the [ENT] key.

Own ship’s position becomes the starting point and a dashed line runs between it and the waypoint selected, which is shown in reverse video.

27