
Motion Detection Setup
●M.D State
Off : Motion Detection does not operate
On : Motion Detection starts operation.
●Area
Select the Motion Detection zone. It is composed of 45x40(NTSC) / 45x48(PAL) sized Block. You are forbidden to determine 4 block rows(Up/Down/Left/Right) to allow them to be
displayed in all monitors.
Select All : Selects the whole area.
Select One : Selects a block every time. Selection is done by a toggle system.
Select Quarter : Split the whole area into 4 pieces, which enables selecting a fourth of the whole area.
Clear All : Cancels the whole area.
Save & Exit : Saves and exits.
Exit : Exits without saving.