Note
#Clicking the speaker icon turns Audio of a channel on or off.
: Audio OFF | : Audio ON |
If you turn Audio of a 
: Audio Disabled
✴For the channel with Audio turned on now, use the following Audio relate button to control Audio volume and set up MUTE.
✴Once TCP/IP is selected, Audio will be turned off.
Note
%Where Alarm or Motion Detection occurs at a channel of
Alarm or Motion Detection established, an icon pops up on the screen
: Motion Detection | : Alarm Event |
Note
^If you connect and set up PTZ device in
✴Select a channel capable of PTZ and use the PTZ related buttons at the bottom to control PTZ. (Refer to the description of PTZ Related Button.)
