
8Network
IP Setup
●Connection Mode
Designates the kind of the network connected to the main body of
supplied by DHCP.
ADSL(PPPoE) : When the main body is connected to the ADSL network with PPPoE.
●Bandwidth
Designate the speed of the network to which the
In the ADSL mode, you may choose either 600Kbps or 300kbps as the bandwidth.
Caution
When the main body is connected to the network using high speed LAN, set to 1 Mbps or 2 Mbps. When the main body is connected to the network supporting low bandwidth such as ADSL, set below 600 Kbps. If you set Bandwidth high though the main body is connected to a slow network, the network load will get heavy therefore the connection with Smart Viewer or video monitoring may be instable.
Note
In the ADSL connection mode, the protocol type in the Transmission Protocol Setup page shall be set to TCP/IP.
●Admin Password
The password for the connection between Smart Viewer and the set with the authority of Admin. The password can be as long as 8 digits.
Press "Enter" and the left number keys from 0 to 9 for setup.
●User Password
The password for Smart Viewer’s access to the set with the authority of general user.
●IP
Set up the IP address to connect the
In case of a flexible IP or ADSL(PPPoE), the IP allocated from the DHCP server or ADSL company. If you fail to connect DHCP or ADSL, 000.000.000.000 is displayed. Then, press "OK" to receive IP. If you repeatedly fail to connect DHCP or ADSL, turn the