Samsung SHR-4081P manual SHR-4081N/P USER’S Manual

SHR-4081N/P USER’S MANUAL

8.Check the connector, wiring, and cable fixing condition inside the product and close the cover.

9.Tighten cover-fixing screws. (5 points on both sides and 1 point in the back side) ✻ You can apply 2 HDDs to each BRACKET-HDD as shown in the figure.

Attention

For HDD addition, please select the same HDD with the existing HDD fixed to the product as far as possible. This product can accept 4 more HDDs, 2 at Primary Slot and 2 at Secondary Slot respectively. Both HDDs attached to Primary Slot and Secondary Slot shall be set to Master and Slave respectively. Refer to User’s Manual for Master or Slave Jumper Setting.

In the event of only one HDD installation, it shall be inserted into the Primary slot.

Note

Refer to Appendix 2 to see which HDD specifications are supplied.

2-7