SHR-4081N/P USER’S MANUAL
System Information and Setup
●Software Version : Displays the current version. Setup is not available.
●Broadcast Format : Displays the current Format(NTSC/PAL). Setup is not available.
●Mac Address : 6 Byte hardware address. Setup is not available.
●Delete device
Deletes the data in the ATA / IEEE1394 / USB / USB memory. Check the box that you want to delete and press "OK".
Data is undeletable during Backup.
●USB S/W Upgrade
When there is no device, USB S/W Upgrade is failed.
Note 1
Being a physical hard disk inside the
[External HDD]
Being a physical hard disk connected with the port and terminal in the back of the
This can be used as Extended HDD or Backup HDD.
-Extended HDD : Supplements Internal HDD quantity. Connected, it takes the place of Internal HDD.
-Backup HDD : Backs up the data recorded in the set.
Note 2
[ATA]
Usage : Internal HDD
This is a physical hard disk connected with SHR 4160 through the IDE cable. [USB]
Usage : External HDD (Extended HDD or Backup HDD)
A physical hard disk connected with the USB port in the back of the
Usage : External HDD (Extended HDD or Backup HDD)
A physical hard disk connected with the IEEE1394 port in the back of the
Note 3
[USB S/W upgrade]
1.You can download the data(tgz file) for upgrade from www.sec.co.kr, CCTV Part.
2.The USB memory should have only one tgz file for upgrade.
3.In case of other memory format than supported by