Furuno GP32 manual Permanently deleting a waypoint from a route, Inserting a waypoint in a route

4. ROUTES

Permanently deleting a waypoint from a route

1.Press the [MENU] key once or twice to display the menu.

2.Choose ROUTES and then press the [ENT] key.

3.Choose the route desired.

4.Press the [ENT] key.

5.Choose the waypoint you want to delete.

6.Press the [ENT] key.

7.Choose “REMOVE?.”

8.Press the [ENT] key.

9.Press the [MENU] key twice to finish.

Inserting a waypoint in a route

To insert a waypoint in a route, do the following:

Temporarily deselecting a waypoint in a route

You can temporarily deselect an unnecessary waypoint from a route. Using the route created in the illustration at the top of the next column as an example, deselect the 2nd intermediate waypoint.

[ROUTE 01]	Intermediate Point 2		OSAKA
	(WPT 002)
			(Arrival point)
Intermediate Point 1
(WPT 001)
KOBE		Intermediate Point 1
(Starting point)
		(WPT 003)

Sample route

If you reconstruct the route without the 2nd intermediate point it would look like the illustration below.

1.	Press the [MENU] key once or twice to
	display the menu.
2.	Choose ROUTES and then press the
	[ENT] key.
3.	Choose the route desired.

WPT 002

SKIP "002"

WPT 001

OSAKA

4.	Press the [ENT] key.
5.	Choose the waypoint which will come
	after the waypoint to be inserted. In the
	illustration below, for example, if you want
	to insert the waypoint between KOBE and
	001, choose 001.

	ROUTE-01				Exit?
CMNT: KOBE → OSAKA
TOTAL DISTANCE				21.0nm
01.			KOBE	10.2nm 180°
02.		001
				9.8 nm 90°
03.			OSAKA
04.		_ _ _ _ _ _
05.		_ _ _ _ _ _

Route contents (Route-01)

6.Press the [ENT] key.

7.Choose “INSERT?.”

8.Press the [ENT] key.

9.Use the cursor pad to enter waypoint.

10.Press the [ENT] key.

11.Press the [MENU] key twice to finish.

KOBE

WPT 003

Reconstruction of sample route above without

the 2nd intermediate waypoint

1.Press the [MENU] key once or twice to display the menu.

2.Choose ROUTES and then press the [ENT] key.

3.Choose route desired and then press the [ENT] key.

4.Place the cursor on the waypoint to skip.

5.Press the [ENT] key.

6.Choose “SKIP?” and then press the [ENT] key. “X” appears to the left of the waypoint skipped as shown in the illustration below.

				ROUTE-01				Exit?
	CMNT: KOBE → OSAKA
		TOTAL DISTANCE					21.0nm
Skipped	01.					KOBE	10.2nm 180°
			x 02.		001
							9.8 nm 90°
waypoint	03.					OSAKA
	04.				_ _ _ _ _ _
	05.				_ _ _ _ _ _

Route contents (Route-01)

24