Furuno GP32 manual Routes, Creating a route from the route menu

4. ROUTES

4.If necessary, change waypoint, position, mark shape, and comment (date and time).

5.Choose “LOG RTE?” and then press the [ENT] key.

6.Repeat steps 1 through 5 to complete the route.

7.When you have entered all the waypoint positions desired, press the [MENU] key twice, choose ROUTES and then press the [ENT] key.

ROUTES

VOYAGE ROUTE:		STOP
INTERVAL: TIME		00H10M
NO	[NEW?]
LOG	001Æ003
_ _	_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _	_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _	_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

ROUTES menu

8.“LOG” shows the first and last waypoints entered for the log route you are currently creating. Choose LOG and then press the [ENT] key.

EDIT?

MOVE?

Route processing options

9.“MOVE?” is selected; press the [ENT] key. The route is moved from “LOG” and is registered under the next sequential route number. (To edit the route before saving it, choose ”EDIT?”. For how to edit a route, see paragraph 4.2.)

Creating a route from the route menu

The procedure which follows describes how to create a route from two preregistered waypoints, KOBE and OSAKA.

1.Press the [MENU] key once or twice to display the menu.

2.Choose ROUTES.

3.Press the [ENT] key.

ROUTES

VOYAGE ROUTE:			STOP
INTERVAL: TIME			00H1M
NO
		[NEW?]
LOG		EMPTY ROUTE
01	001 → 003

_ _	_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _	_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

ROUTES list

4.“NEW?” is selected; press the [ENT] key. The screen shown below appears.

ROUTE-01 Exit?

CMNT: EMPTY ROUTE

TOTAL DISTANCE			_ _ _ _ nm
01.		_ _ _ _ _ _	_ _ _ _ nm _ _ _°
02.	_ _ _ _ _ _
			_ _ _ _ nm _ _ _°
03.	_ _ _ _ _ _
			_ _ _ _ nm _ _ _°
04.	_ _ _ _ _ _
			_ _ _ _ nm _ _ _°
05.	_ _ _ _ _ _

Screen for entering route by waypoint

5.Choose location (01, etc.) and then press the [ENT] key. Use ▲ or ▼ to display waypoint name. (In the example, KOBE.)

6.Press the [ENT] key.

7.Repeat steps 5 and 6 until you have entered all waypoints desired.

Note: If you enter a waypoint which has not been registered, your screen will show a message which looks something like the one below. Press ◄ to choose YES and then press the [ENT] key to create a new waypoint; choose NO to return to the route entry screen.

NEW WPT NAME.

CREATE 008?

ARE YOU SURE?

YES NO

New waypoint creation screen

When you choose YES, the following screen appears. Edit the waypoint as necessary, choose “Exit?” and then press the [ENT] key.

20