Setting up your TV 65
Using theAutoAspect feature
Scrolling the TheaterWideTM picture (TheaterWide 2 and 3 only)
You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 modes for each input.
To set the scroll settings:
1In the Picture Menu, highlight Display Settings, and then press the ENTER button.
2Highlight Picture Position, and then press the ENTER button. (The Picture Position will be available when Picture Size is TheaterWide 2 or TheaterWide 3.)
(Sample Image) Picture menu - Theater Settings selection
3The Picture Position screen will appear, press ◄/►(arrow) button to scroll the picture up and down as needed.
4To save the new settings, highlight Done, and then press the ENTER button.
To revert to the factory defaults, highlight Reset and then press the ENTER button.
The adjustment range is from
When receiving a signal at 480i resolution, the picture scroll function may have limited adjustment range.
Using the Auto Aspect feature
When this feature is set to On, the TV will automatically select the picture size when one of the following input sources is received:
vA 480i, 480p, 720p, 1080i digital signal from the ANT/CABLE input.
v480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal from the HDMI® inputs.
