Toshiba 50L1400UC, 23L1400UC manual Adding and clearing channels and inputs in the History List

Setting up your TV 59

Favorites browser

Adding and clearing channels and inputs in the History List

As a channel or input is tuned, the Channel Browser adds it to the History List and displays it on the right side of the Channel Browser. Previously tuned channels/inputs are shifted to the left, eventually moving off the left side. Press the BACK CB arrow button to surf backward through the previously tuned channels/ inputs. Any channel or input that is tuned repeatedly will not be repeated in the History List, but instead is moved to the end of the list on the right side of the Channel Browser.

vAll channels that are tuned using the numeric buttons on the remote control.

vAll channels that are tuned using the ◄/►(arrow) buttons on the remote control.

Whenever an item is selected that cannot be tuned (for various reasons), the TV will automatically tune to the previously viewed channel or input.

Clearing channels from the History List:

vReconfiguring the ANT/CABLE input will clear the History List. see “ANT/CABLE IN” on page 46

vTurning off the TV will clear the History List.

Tuning to the next programmed channel

To tune to the next programmed channel, press the ◄/►(arrow) buttons on the remote control or TV control panel.

This feature will not function until you have programmed channels into the TV’s channel memory, see “Storing channels in memory (optional)” on page 47

Tuning to a specific channel (programmed or unprogrammed)

To tune analog channels:

Press the Channel Number (0–9) on the remote control. For example, to select channel 125, press 1, 2, 5, and then press the ENTER button.

Tuning digital channels:

Press the Channel Number (0–9) on the remote control, followed by the (Dash 100) button, and then the sub-channel number. For example, to select digital channel 125-1, press 1, 2, 5, –, 1, and then press the ENTER button.