7
7) VESA Mounting Pattern
TV Size | Hole Pattern (HxV) | Screw Size |
|
|
|
23” | 100mm x 100mm | M4 |
32” | 200mm x 200mm | M6 |
40” | 200mm x 200mm | M6 |
50” | 400mm x 200mm | M8 |
Removing the Pedestal Stand
1)Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface.
Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.
2)Remove the stand screws shown in the diagram below.This will allow removal of the pedestal stand.
3)Once you have removed the screws holding the pedestal stand in place, remove the pedestal stand from the TV.
23” TV. | VESA Mounting Pattern |
|
Two stand screws
32” TV. | VESA Mounting Pattern |
|
Two stand screws | Hook Sturdy strap |
| (as short as possible) |
40” TV. | VESA Mounting Pattern |
|
|
|
|
|
|
|
|
|
|
| Hook Sturdy strap | |
| Two stand screws | ||||
| (as short as possible) | ||||
|
|
|
| ||
50” TV. |
| VESA Mounting Pattern | |||
|
| ||||
|
|
|
| |
|
| Hook Sturdy strap | ||
Two stand screws | ||||
(as short as possible) | ||||
|
| |||
CAUTION: Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. To secure the TV, use a sturdy strap from the hook(s) on the rear of the TV to a wall stud, pillar, or other immovable structure. Make sure the strap is tight, secure, and parallel to the floor.
