Table 3.3 Telnet Configuration Parameter Examples (1 of 2)

IP Address

ip:

where ip identifies the parameter

Parameter

192.168.10.1

and 192.168.10.1 specifies the

Example

 

address for the printer. By typing

 

 

this parameter, you can overwrite

 

 

the IP address used to make the

 

 

Telnet connection with one you

 

 

have selected.

 

 

 

Subnet Mask

subnet-mask:

where subnet-maskidentifies the

Example

255.255.255.0

parameter and 255.255.255.0

 

 

specifies the subnet mask.

 

 

 

Default Gateway

default-gw:

where default-gwidentifies the

Example

192.168.10.2

parameter and 192.168.10.2

 

 

specifies the IP address of the

 

 

gateway.

 

 

Note: If the HP Jetdirect print

 

 

server is configured by DHCP and

 

 

you change the subnet mask or the

 

 

default gateway address (using

 

 

front-panel, Telnet, or other tool),

 

 

you should change the IP address

 

 

to release the present IP address

 

 

back to the DHCP server IP

 

 

address pool.

 

 

 

Syslog Server

syslog-server:

where syslog-serveridentifies

Example

192.168.10.3

the parameter and

 

 

192.168.10.3 specifies the IP

 

 

address of that server.

 

 

 

Protocol

IPX/SPX: 1

(1 enables, 0 disables)

Enabling/Disabling

dlc-llc: 1

(1 enables, 0 disables)

Example

ethertalk: 1

(1 enables, 0 disables)

 

 

 

Idle Timeout

idle-timeout:

where idle-timeoutidentifies

Parameter

120

the parameter and 120 specifies

Example

 

the number of seconds an idle print

 

 

data connection is allowed to

 

 

remain open. If you set this

 

 

parameter to 0, the connection

 

 

does not terminate and no other

 

 

host is able to make a connection.

 

 

 

Banner Page

banner: 1

(1 enables, 0 disables)

Parameter

 

 

Example

 

 

 

 

 

ENWW

TCP/IP Configuration 37