Table 7.2 General HP Jetdirect Messages (3 of 10)

Message

Description

 

 

INITIALIZING TRYING

The HP Jetdirect print server is trying to connect to the

TO CONNECT TO

NetWare server(s). This is a normal message. Wait until

SERVER

the connection is established or another status message

 

appears.

 

 

INVALID GATEWAY

The default gateway IP address specified for the

ADDRESS

HP Jetdirect print server (through BOOTP or NOVRAM)

 

is an invalid IP address for specifying a single node.

 

 

INVALID IP ADDRESS

The IP address specified for the HP Jetdirect print server

 

(through BOOTP or NOVRAM) is an invalid IP address for

 

specifying a single node.

 

 

INVALID SERVER

The TFTP server IP address specified for the HP Jetdirect

ADDRESS

print server (through BOOTP) is an invalid IP address for

 

specifying a single node.

 

 

INVALID SUBNET MASK

The IP subnet mask specified for the HP Jetdirect print

 

server (through BOOTP or NOVRAM) is an invalid subnet

 

mask.

 

 

INVALID SYSLOG

The syslog server IP address specified for the

ADDRESS

HP Jetdirect print server (through BOOTP) is an invalid IP

 

address for specifying a single node.

 

 

INVALID TRAP DEST

One of the SNMP trap (Trap PDU) destination IP

ADDRESS

addresses specified for the HP Jetdirect print server

 

(through TFTP) is an invalid IP address for specifying a

 

single node.

 

 

I/O CARD INITIALIZING

The HP Jetdirect print server is initializing the network

(INIT)

protocols. For more information, see the network

 

operating system status line on the configuration page.

 

 

I/O CARD NOT READY

There is a problem with the print server or its configuration.

 

Following the I/O CARD NOT READY message is a status

 

message. See this table for a detailed explanation of all

 

status messages.

 

 

I/O CARD READY

The HP Jetdirect print server is connected and awaiting

 

data.

 

 

LAN ERROR-AUTO

Run the power-on self-test: turn the printer off, then on

REMOVAL

again. If this message reappears on another configuration

 

page, you may have a problem with one of the HP Jetdirect

 

print servers on your network. Check all the print servers

 

on the network for proper operation.

 

 

LAN ERROR-BABBLE

Check the network connections. If the connections are

 

intact, run the power-on self-test: turn the printer off, then

 

on again. If the error persists, replace the HP Jetdirect

 

print server. For replacement instructions, see the

 

hardware installation guide for your print server.

 

 

ENWW

HP Jetdirect Configuration Page Messages 71