Table 7.2 General HP Jetdirect Messages (4 of 10)

Message

Description

 

 

LAN

Check the network connections. If the connections are

ERROR-CONTROLLER

intact, run the power-on self-test: turn the printer off, then

CHIP

on again. If the error persists, replace the HP Jetdirect

 

print server.

 

 

LANERROR-EXTERNAL

The HP Jetdirect print server is incorrectly connected to

LOOPBACK

your network or is defective. Make sure your HP Jetdirect

 

print server is correctly attached to your network. In

 

addition, check the cabling and connectors.

 

 

LAN ERROR-INFINITE

There is a network congestion problem. Check network

DEFERRAL

cables.

 

Note: If the print server is not connected to the network,

 

this error cannot occur.

 

 

LAN ERROR-INTERNAL

Check all network connections.

LOOPBACK

 

 

 

LAN ERROR-LOSS OF

Check the network connections. If the connections are

CARRIER

intact, run the power-on self-test: turn the print server off,

 

then on again. If the error persists, replace the

 

HP Jetdirect print server.

 

 

LAN ERROR-NO

This message is displayed if Link Beat is not sensed.

LINKBEAT

Check the network cable, and verify that the

 

concentrator/hub is providing Link Beat.

 

 

LAN ERROR-NO SQE

Check the network connections. If the connections are

 

intact, run the power-on self-test: turn the print server off,

 

then on again. If the error persists, replace the

 

HP Jetdirect print server.

 

 

LAN ERROR-RECEIVER

There may be a problem with your network cabling or the

OFF

HP Jetdirect print server. Check the cabling and

 

connectors on your Ethernet network. If you cannot find a

 

problem with your network cabling, run the power-on

 

self-test: turn the print server off, then on again. If the error

 

persists after the printer is turned on again, there is a

 

problem with the HP Jetdirect print server.

 

 

LAN ERROR-REMOVE

Run the power-on self-test: turn the print server off, then

RECEIVE

on again. If this message reappears on the resulting

 

configuration page, you may have a problem with one of

 

the HP Jetdirect print servers on your network. Check all

 

the HP Jetdirect print servers on the network for proper

 

operation.

 

 

LAN ERROR-RETRY

There is a problem with your network cabling or external

FAULTS

network configuration. Check the network cables and

 

connections. Verify operation of the hub or switch port.

 

 

72 HP Jetdirect Configuration Page Messages

ENWW