Table 7.4 Novell NetWare Configuration Messages (1 of 2)
Message | Description |
|
|
IPX/SPX STATUS: | Indicates the current IPX/SPX protocol status. |
| DISABLED indicates that IPX/SPX was manually disabled. |
| READY indicates the HP Jetdirect print server is awaiting |
| data. |
| INITIALIZING indicates that the print server is registering |
| the node address or name. |
| Code is in the middle of a download. |
|
|
MODE: | The mode used by the print server. |
| QUEUE SERVER indicates that the print server receives |
| data directly from the queue; REMOTE PRINTER, with the |
| printer number following it, indicates that the print server |
| emulates a Novell remote printer. If the printer is not |
| configured, this field displays QUEUE SERVER. |
|
|
SOURCE ROUTING: | Indicates the current status of source routing. |
| UNKNOWN is displayed when NetWare source routing is |
| configured to AUTO, but the source routing method has not |
| been detected. |
| NO is displayed when source routing is configured to AUTO, |
| and the automatic algorithm has determined that source |
| routing should not be used. |
| YES is displayed when source routing is configured to |
| AUTO, and the automatic algorithm has determined that |
| source routing should be used. |
| DISABLED, SINGLE R, or ALL RT is displayed when the |
| user has manually configured source routing through the |
| printer's control panel or through software. |
|
|
NODE NAME: | Queue Server Mode: The print server name. This name |
| must match a valid print server on the appropriate NetWare |
| file server. The default name is NPIXXXXXX. |
| Remote Printer Mode: The name you gave the network |
| printer when you configured the network printer. The default |
| name is NPIXXXXXX. |
|
|
80 HP Jetdirect Configuration Page Messages
ENWW
