Table 3.1 | Tags in the “bootptab” file (2 of 2) | |
ha |
| The hardware address tag. The hardware (MAC) address |
|
| is the |
|
| server. It can be found on the HP Jetdirect configuration |
|
| page as the LAN HW ADDRESS. On HP Jetdirect |
|
| external print servers, it is printed on a label attached to |
|
| the print server. |
|
|
|
ip |
| The IP address tag (required). This address will be the HP |
|
| Jetdirect print server’s IP address. |
|
|
|
gw |
| The gateway IP address tag. This address identifies the |
|
| IP address of the default gateway (router) that the HP |
|
| Jetdirect server will use for communications with other |
|
| subnets. |
|
|
|
sm |
| The subnet mask tag. The subnet mask will be used by |
|
| the HP Jetdirect print server to identify the portions of an |
|
| IP address that specify the network/subnetwork number |
|
| and the host address. |
|
|
|
lg |
| The syslog server’s IP address tag. It specifies the server |
|
| that the HP Jetdirectprint server sends syslog messages |
|
| to. |
|
|
|
T144 |
| A |
|
| of the TFTP configuration file. Maximum length of the path |
|
| name is 33 characters. The path name must be in double |
|
| quotes (for example, “pathname”). On |
|
| /usr/tftpdir is prepended to the path. For file format |
|
| information, refer to “TFTP Configuration File Entries“. |
|
|
|
A colon (:) indicates the end of a field, and a backslash (\) indicates that the entry is continued on the next line. Spaces are not allowed between the characters on a line. Names, such as host names, must begin with a letter and can contain only letters, numbers, periods, or hyphens.The underline character (_) is not allowed. Refer to your system documentation or online help for more information.
TFTP Configuration File Entries
To provide additional configuration parameters for your HP Jetdirect print server, such as SNMP (Simple Network Management Protocol) or
22 TCP/IP Configuration
ENWW
