HP 510x Print Server manual Tftp Configuration File Parameters 2

Table 3.2 TFTP Configuration File Parameters (2 of 3)

contact:	ASCII character string that identifies the person who
	administers or services the printer (SNMP sysContact
	object). This may include how to contact this person. The
	default contact is undefined.
get-community-	Specifies a password that determines which SNMP
name:	GetRequests the HP Jetdirect print server will respond
	to. This is optional. The community name must be ASCII
	characters. The maximum length is 32 characters.
set-community-	Specifies a password that determines which SNMP
name:	SetRequests (control functions) the HP Jetdirect print
	server will respond to. The community name of an
	incoming SNMP SetRequest must match the print
	server’s “set community name” for the print server to
	respond. SetRequests must come from hosts that are
	configured in the print server’s host access list.
	Community names must be ASCII characters. The
	maximum length is 32 characters.
trap-dest:	Enters a host’s IP address into the HP Jetdirect print
	server’s SNMP trap destination list. If the list is empty,
	the print server does not send SNMP traps. The list may
	contain up to four entries. The default SNMP Trap
	Destination List is empty. To receive SNMP traps, the
	systems listed on the SNMP trap destination list must
	have a trap daemon to listen to those traps.
trap-community	Community name (password) included with SNMP traps
-name:	that are sent by the HP Jetdirect print server to a host
	computer. The default community name is public.
	Community names must be ASCII characters. The
	maximum length is 32 characters.
authentication-	Configures the print server to send (on) or not send (off)
trap:	SNMP authentication traps. Authentication traps indicate
	that an SNMP request was received, but the community
	name check failed. The default is “off.”

ENWW TCP/IP Configuration 25