Table 7.2

General HP Jetdirect Messages (9 of 10)

 

 

 

Message

 

Description

 

 

UNABLE TO ATTACH TO

A failure was detected when the HP Jetdirect print server

QUEUE

 

tried to attach to one of the queues assigned to the print

 

 

server object. This may be because no servers are allowed

 

 

to attach to this queue. There may also be a networking

 

 

or security problem. Use PCONSOLE to make sure that

 

 

servers are allowed to attach to the queue, to delete the

 

 

print server object from the list of queue servers if you want

 

 

the HP Jetdirect print server to service other queues, or

 

 

to delete the queue and create a new one (the print server

 

 

object must be added to the list of queue servers).

 

 

When the HP Jetdirect print server is configured for

 

 

multiple file servers, the error is only displayed on the

 

 

configuration page if none of the file servers made the

 

 

connection.

 

 

UNABLE TO CONNECT

Remote Printer mode: The HP Jetdirect print server was

TO SERVER

 

unable to establish an SPX connection with the print

 

 

server. Make sure that the print server is running and that

 

 

all cables and routers are functioning correctly.

 

 

Queue Server mode: The HP Jetdirect print server could

 

 

not establish an NCP connection to the file server. Make

 

 

sure that the correct file servers are connected.

 

 

When multiple file servers are configured, the error is only

 

 

displayed on the configuration page if none of the file

 

 

servers were successfully connected.

 

 

UNABLE TO FIND

The HP Jetdirect print server was unable to find the

SERVER

 

NetWare print server (Remote Printer mode) or file server

 

 

(Queue Server mode). (There was no response to service

 

 

queries for advertising print servers or file servers that

 

 

matched the configured print server or file server name.)

 

 

Make sure that the print server or file server is running and

 

 

that the print server or file server name configured on the

 

 

HP Jetdirect print server matches the actual name used

 

 

by the print server or file server. Also make sure that all

 

 

cables and routers are functioning correctly.

 

 

UNABLE TO GET NDS

The NDS server address cannot be located or accessed.

SRVR ADDR

 

 

 

 

 

ENWW

HP Jetdirect Configuration Page Messages 77