●From a UNIX command prompt:

arp -s<IP address> <LAN hardware address>

ping <IP address>

where <IP address> is the desired IP address to be assigned to the print server. The arp command writes the entries to the arp cache on the workstation, and the ping command configures the IP address on the print server.

For example:

●In Windows

arp -s 192.168.10.1 00-b0-60-a2-31-98 ping 192.168.10.1

●In UNIX

arp-s 192.168.10.1 00:b0:60:a2:31:98 ping 192.168.10.1

Note

Once the IP address has been set on the print server,

 

additional arp and ping commands will be ignored.

 

Once the IP address is configured, arp and ping

 

cannot be used unless the print server is reset to

 

factory values.

 

On UNIX systems, the arp -scommand may vary

 

between different systems.

 

Some BSD-based systems expect the IP address (or

 

host name) in reverse order. Other systems may

 

require additional parameters. See your system

 

documentation for specific command formats.

 

 

ENWW

TCP/IP Configuration 33