Table 7.6 | TCP/IP Configuration Messages (1 of 2) | |
|
|
|
Message |
| Description |
|
| |
TCP STATUS: | Current TCP status. | |
|
| DISABLED: Indicates that TCP/IP was manually disabled. |
|
| READY: Indicates the HP Jetdirect print server is awaiting |
|
| data. |
|
| INITIALIZING: Indicates that the print server is searching |
|
| for the BOOTP server, or trying to get the configuration file |
|
| through TFTP. |
|
| NOT IN USE: Code is in the middle of a download. |
|
| |
HOST NAME: | The host name configured on the print server. It may be | |
|
| truncated. NOT SPECIFIED indicates that no host name |
|
| was specified in the BOOTP configuration information, or |
|
| TFTP configuration file (using a “name:” entry). |
|
|
|
CONFIG BY |
| The location from which the print server is obtaining or has |
|
| obtained its IP configuration information. The options are |
|
| BOOTP, RARP, default IP, BOOTP/TFTP, DHCP, |
|
| DHCP/TFTP, or USER SPECIFIED (Telnet, printer’s |
|
| control panel, HP Web Jetadmin, or other). |
|
| |
IP ADDRESS: | The Internet Protocol (IP) address assigned to the | |
|
| HP Jetdirect print server. This is a required entry for |
|
| operation of the print server. |
|
| |
SUBNET MASK: | The IP subnet mask configured on the HP Jetdirect print | |
|
| server. NOT SPECIFIED is indicated if no subnet mask has |
|
| been configured, or if the subnet mask is zero. |
|
| |
DEF. GATEWAY: | The IP address of the gateway used when sending packets | |
|
| off the local network. Only one default gateway may be |
|
| configured. |
|
| |
SYSLOG SERVER: | Marks the IP address of the syslog server configured on | |
|
| the print server. NOT SPECIFIED indicates no syslog |
|
| server has been configured, or the syslog server IP |
|
| address is zero. |
|
| |
IDLE TIMEOUT: | The timeout value expressed in seconds after which the | |
|
| print server closes an idle TCP print data connection. |
|
| Acceptable values are integers between 0 and 3600. A |
|
| value of zero turns off the timeout mechanism. |
|
| |
BOOTP SERVER | The IP address of the system that responds to the print | |
|
| server's BOOTP request with configuration data. This |
|
| parameter is omitted when the print server is not |
|
| configured using BOOTP. NOT SPECIFIED indicates that |
|
| the server's IP address field in the BOOTP reply packet |
|
| was zero. |
|
|
|
|
|
|
82 HP Jetdirect Configuration Page Messages
ENWW
