HP 510x Print Server manual 81

Table 7.4 Novell NetWare Configuration Messages (2 of 2)

Message	Description
PORT X STATUS:	READY: Print server is awaiting data.
	INITIALIZING: Print server is registering the node address
	or name/type.
SERVER NAME:	The name of the NetWare file server or print server. If no
	name is displayed, the Jetdirect print server has not been
	configured.
	If the message “UNABLE TO FIND FILE SERVER” appears
	in the “IPX/SPX STATUS:” section of the configuration page,
	the SERVER NAME field identifies the Jetdirect discovery
	method [NSQ] (Nearest Service Query) or [GSQ] (General
	Service Query) and the name of the proxy file server used
	to locate the configured bindery servers.
NETWORK	The first column indicates the network number associated
XXXXXX	with the protocol frame type for communication between
FRAME TYPE	server and printer. Unless a specific frame type has been
XXXXX	manually configured, the print server automatically
RCVD	determines the protocol frame type by listening to the
XXXX	NetWare data being transferred over the network. If
	UNKNOWN is listed, the HP Jetdirect print server is still
	trying to determine which network number to use. If the
	network number is DISABLED, a specific frame type has
	been manually configured. The Frame Type value can be
	EN_8023, EN_8022, EN_II, or EN_SNAP. The RCVD count
	indicates how many packets have been received for each
	frame type.

Table 7.5 DLC/LLC Configuration Messages

Message	Description
DLC/LLC STATUS:	Current DLC/LLC status:
	DISABLED: Indicates that DLC/LLC was manually disabled
	through the printer's control panel (if available).
	DISABLED: Indicates that LAN Server was manually
	disabled through the printer's control panel (if available).
	READY: Indicates the HP Jetdirect print server is awaiting
	data.
	NOT IN USE: Code is in the middle of a download.
SERVER ADDRESS:	Station address of the remote end of the connection.

ENWW HP Jetdirect Configuration Page Messages 81