Emerson AC8 user manual Enter Pager NUMBER40 Characters MAX Command Successful

System and Control Options

7.8.4Pager Setup - Communications Check (Service Terminal Interface only)

The Service Terminal Interface offers two additional options for pager setup, which are not available through the LCD interface:

•Enable communications check

•Enter time to perform communications check

To access these options:

•Connect to the AC8 either from a remote computer or through the RS232 port (see A.2 - Connecting to the Service Terminal Interface).

•At the Main Menu, enter 0 (zero—Setup System - Login Required).

•At the Login Menu, enter your password, then press the Enter key.

•At the Setup Menu, enter 6 (Setup Modem&Pagers).

•At the Setup Modem & Pagers menu, shown below, enter a number (1-4)to select a pager.

Setup Modem & Pagers - Pager Setup		(Service Terminal Interface only)
	SETUP MODEM&PAGERS
	Input pager and
	modem information
	Select pager or modem
		CURRENT NUMBER
		*******************
	1=PAGER NUMBER 1	An "A" is required
	2=PAGER NUMBER 2	as 1st character
	3=PAGER NUMBER 3	for an alpha pager,
	4=PAGER NUMBER 4	an "N" for a numeric
	5=MODEM CONFIGURATION	pager, and an "M"
	6=RETURN TO SETUP MENU	for a remote modem.
	7=RETURN TO MAIN MENU	*******************
	SELECT A NUMBER:1

• At the Enter Pager Number prompt, you may press Enter to bypass this option (or see 7.8.3 - Pager Setup - Pager Number and PIN for instructions on entering the pager number).

>ENTER PAGER NUMBER(40 CHARACTERS MAX). >[] >[

>COMMAND SUCCESSFUL

•At the Enter Pager PIN Number prompt, you may press Enter to bypass this option (or see 7.8.3 - Pager Setup - Pager Number and PIN for instructions on entering the pager PIN).

>ENTER PAGER PIN NUMBER (20 CHARACTERS MAX). >[] >[

>COMMAND SUCCESSFUL

55