![](/images/new-backgrounds/1185514/185514127x1.webp)
System and Control Options
Enable Communications Check
Enabling this function permits a daily communications test between the AC8 and the selected pager. Once each day the AC8 dials the pager at a specified time and sends this message: “AC8 COMM CHECK.” (The time of the test is specified at the next prompt, Enter Time To Perform Communi- cations Check.)
•At the Enable Communications Check prompt, enter Y (Yes - enable) or N (No - disable). The cur- rent setting appears in
>ENABLE COMMUNICATIONS
>[
>COMMAND SUCCESSFUL
•Press Enter to proceed, or Escape to cancel the entry. If you make a change, a confirmation mes- sage appears: “Command Successful.”
Enter Time To Perform Communications Check
This function schedules the daily communications test between the AC8 and the selected pager, as described in the previous section.
•At the Enter Time To Perform Communications Check prompt, enter the time to initiate the com- munications check, using the format HH:MM (hours and minutes in military time), ranging from 00:00 for midnight to 23:59 for 11:59 p.m. The current setting appears in
>ENTER TIME TO PERFORM COMMUNICATIONS CHECK(HH:MM). >[00:00] >[
>COMMAND SUCCESSFUL
•Press Enter to proceed, or Escape to cancel the entry. If you make a change, a confirmation mes- sage appears: “Command Successful.”
56