Setup Menu

Firmware Update (Service Terminal Interface only)

For details on this feature, see 7.9.9 - Perform Firmware Update (Service Terminal Interface only).

Firmware Update

PERFORM FIRMWARE UPDATE

This command will update the existing firmware

1=PERFORM FIRMWARE UPDATE

2=RETURN TO SETUP SYSTEM INFO MENU 3=RETURN TO SETUP MENU

4=RETURN TO MAIN MENU

SELECT A NUMBER:1

>PERFORM FIRMWARE UPDATE-YES(Y) OR NO(N)? >[N]

>[

INSTRUCTIONS TO PERFORM FIRMWARE UPDATE:

ASSUMES USING MICROSOFT WINDOWS HYPERTERMINAL APPLICATION

-SELECT TRANSFER FROM THE TOOLBAR

-SELECT SEND FILE

-ENTER FILE NAME-FIRMWARE FILE LOCATION & NAME

-SELECT XMODEM FROM THE PROTOCOL BOX

-SELECT SEND BUTTON

>WAITING TO SEND PROGRAM FILE >DONE

>CHECKSUM IS....

>PROGRAM VERSION....

>WAITING TO SEND FLASH FILE

>DONE

>FIRMWARE UPDATE SUCCESSFUL

Initiate Remote Alarm Test (Service Terminal Interface only)

For details on this feature, see 7.9.10 - Initiate Remote Alarm Test (Service Terminal Interface only).

Initiate Remote Alarm Test

INITIATE REMOTE ALARM TEST

This command simulates an alarm to test alarm notification

for the service phone number

1=INITIATE REMOTE ALARM TEST 2=RETURN TO SETUP SYSTEM INFO MENU 3=RETURN TO SETUP MENU

4=RETURN TO MAIN MENU

SELECT A NUMBER:1

>SIMULATE AN ALARM CONDITION-YES(Y) OR NO(N)? >[N]

>[

>COMMAND SUCCESSFUL

106

Page 114
Image 114
Emerson AC8 user manual Firmware Update, Initiate Remote Alarm Test