![](/images/new-backgrounds/1185514/185514129x1.webp)
System and Control Options
7.9Setup System - Setup System Info
The Setup System Info options allow users to:
•Change
•Change Date & Time/Automatic Daylight Saving
•Setup Site
•Connect
•Backup and Upload Configuration File (Service Terminal Interface
•Setup Serv Ph
•Restore
•Perform Firmware Update (Service Terminal Interface
•Initiate Remote Alarm Test (Service Terminal Interface
To change any Setup System Info features:
Log In and Choose Setup System
• From the Main Menu, use the arrows ↑↓ to choose System and Control, then press Enter ↵ (see 7.1 - Login for help).
• Enter your password at the Login screen.
• From the System and Control Menu, use the arrows ↑↓ to choose Setup System, then press Enter ↵ .
Select Setup System
• From the Setup System Menu, shown at right, use the arrows ↑↓ to choose Setup System Info and press Enter ↵ .
•Use the steps following Figure 11 to access any of the Setup Sys- tem Info options.
Setup System Menu
SETUP INPUTS SETUP COMMON ALARM SETUP SENSOR
↑↓ =NEXT ↵ =SELECT
SETUP ZONES SETUP OUTPUTS SETUP MODEM&PAGERS
>SETUP SYSTEM INFO SETUP OPERATION SETUP I/O MATRIX
Figure 11 offers a quick look at the Setup System Info screens available via the LCD interface.
Figure 11 Menu overview - Setup System Info menu
Setup System Info
SETUP SYSTEM INFO
CHANGE PASSWORD
CHANGE DATE & TIME
SETUP SITE ID
CONNECT BATTERY
SETUP SERV PH NUM
FACTORY DEFAULTS
Setup System Info options
Change Password
CHANGE PASSWORD
AAAA
See Section 7.9.1
Change Date & Time
CHANGE DATE & TIME | See |
DAYLIGHT SVG TIME: Y | Section |
7.9.2 | |
|
|
Setup Site ID
SETUP SITE ID
AAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAA
See Section 7.9.3
Connect Battery
IS THE BATTERY CONNECTED? Y
See Section 7.9.4
Setup Serv Ph Num
ENTER PHONE NUMBER 9,,18005551212
See Section 7.9.6
Factory Defaults
RESTORE ALL DEFAULTS ARE YOU SURE? N
See Section 7.9.8
57