Emerson AC8 user manual Setup Zones, Setup Outputs

Setup Menu

A.6.4 Setup Zones

For details on this feature, see 7.6 - Setup System - Setup Zones.

Setup Zones

SETUP ZONES

Select zones	and number
of devices	in the zone
ZONES #	DEVICES
1=ZONE 1	4
2=ZONE 2	0
3=ZONE 3	0
4=ZONE 4	0
5=RETURN TO	SETUP MENU
6=RETURN TO	MAIN MENU

SELECT A NUMBER:

># DEVICES IN ZONE 1 >[4] >[

A.6.5 Setup Output

For details on this feature, see 7.7 - Setup System - Setup Outputs.

Setup Outputs

SETUP OUTPUTS

Setup output of device
Select output to edit
OUTPUT	DEFINITION	*******************************************
		NO=NORMALLY OPENED
1=DEVICE_1	NO-OP-E-E	NC=NORMALLY CLOSED
2=DEVICE_2	NO-OP-E-E
3=DEVICE_3	NO-OP-E-E	OP=OPERATING/ON
4=DEVICE_4	NO-ST-E-E	ST=STANDBY MODE
5=DEVICE_5	NO-NU-E-E	NU=NOT USED
6=DEVICE_6	NO-NU-E-E
7=DEVICE_7	NO-NU-E-E	D=DISABLE DEVICE ON ALARM CONDITION
8=DEVICE_8	NO-NU-E-E	E=LEAVE DEVICE OPERATING ON ALARM CONDITION
9=RETURN TO	SETUP MENU
0=RETURN TO	MAIN MENU	D=DISABLE DEVICE IN EMERGENCY POWER OP
		E=LEAVE DEVICE OPERATING (EMERGENCY POWER OP)

*******************************************

SELECT A NUMBER:1

>SET TO NORMALLY OPENED(NO) OR NORMALLY CLOSED(NC) >[NO]

>[]

>DEVICE_1 TO OPERATING/ON(OP), STANDBY MODE(ST), NOT USED(NU) >[OP]

>[]

>DEVICE_1 TO ENABLE(E) OR DISABLE(D) DEVICE ON ALARM >[E]

>[]

>DEVICE_1 TO ENABLE(E) OR DISABLE(D) DEVICE IN EMERGENCY POWER OP >[E]

>[

99