ENGLISH
6 ACOUSTIC EQ
This display is for setting up the equalizer and changing the Equalizer mode.
• PRESET G. EQ ADJ :
• CHECK AUTO 1 & 2 :
3. Select “FRONT”, “FLAT”, “AUDYSSEY”, “PRESET” or “OFF” with the 1 or 2 cursor buttons.
After you complete this portion of the setup, move the cursor to “RETURN” with the 3, 4, 1 and 2 cursor buttons and press the OK/ENTER button.
To use the remote controller (RC8001SR) to change the EQ MODE, press the AMP button and then the
6 . ACOUSTIC EQ .
EQ . MODE | : | OFF |
|
PRESET G . EQ1 ADJ |
| ||
CHECK AUTO |
|
|
|
RETURN | NEXT | EXIT |
EQ MODE:
There are 4 equalizer modes to choose from: PRESET G. EQ that allows the user to manually adjust the equalizer, and AUDYSSEY, FRONT and FLAT that automatically adjust the equalizer from the measurement results of the AUTO SETUP feature (see page 46).
AUDYSSEY:
This mode adjusts the frequency characteristics of all speakers so as to create the best listening environment for the sound characteristics of the listening room.
FRONT:
This mode matches the characteristics of each speaker to those of the front speakers.
FLAT:
This mode flattens the frequency characteristics of all speakers.It is suited for playback of multichannel music such as Dolby Digital and DTS.
PRESET:
This mode adjusts the graphic equalizer that was set in PRESET G.EQ ADJ to adjust the characteristics of each speaker (see page 57).
OFF:
The graphic equalizer is not used.
1. Select “6. ACOUSTIC EQ” from MAIN MENU with the 3 or 4 cursor buttons and press the OK/ENTER button.
6 . ACOUSTIC EQ .
EQ . MODE | : | OFF |
|
PRESET G . EQ ADJ | |||
CHECK AUTO |
|
|
|
RETURN | NEXT EXIT |
2. Select “EQ. MODE” with the 3 or 4 cursor
buttons.
>button until the second page is displayed. When EQ is displayed on the remote controller, press the EQ (D5) button.
M
D1
D2
D3
D4
USEPAGE 2
D5
CH | VOL |
TUNER CD |
TAPE | AUX1 | AUX2 | AMP |
|
| LIGHT |
|
1 |
|
| 2 |
RC8001SR
Learning Remote Controller
Each time this button is pressed, the EQ MODE changes as follows.
OFF FRONT FLAT AUDYSSEY PRESET
Notes:
•“FRONT”, “FLAT” and “AUDYSSEY” can be selected after executing the AUTO SETUP feature.
•If a speaker that was determined “NON” in Auto Setup is manually turned on, the “AUDYSSEY”, “FRONT” and “FLAT” modes cannot be selected.
•The equalizer turns off when the Pure Direct mode, Source Direct mode, Dolby Headphone or Virtual mode is set.
•ACOUSTIC EQ MODEs are not used during playback of Dolby TrueHD, Dolby Digital Plus, or
•Tone Control is disabled when an EQ MODE is in use.
| PRESET | ADJUST |
|
| |||||
RESET: | ALLCH |
| 63 - 15 . 0 | ||||||
CH | :SR |
|
| 125 | - 2 . 5 | ||||
+9 |
|
|
|
|
| 250 | - 5 . 0 | ||
|
|
|
|
| 500 | +9 | . 0 | ||
0dB |
|
|
|
|
| ||||
|
|
|
|
| 1k | +3 | . 5 | ||
|
|
|
|
|
| ||||
|
|
|
|
|
| 2k | - 5 . 5 | ||
|
|
|
|
| 4k | - 7 . 0 | |||
63 | 250 | 1k | 4k | 16k | 8k | - 18 | . 5 | ||
16k | - 20 | . 0 | |||||||
125 500 | 2k | 8k |
| ||||||
RETURN |
|
|
|
|
| EXIT |
|
| CHECK | AUTO |
|
| ||||
MD: | AUDYSSEY |
| 63 - 15 . 0 | ||||||
CH:SR |
|
|
|
| 125 | - 2 . 0 | |||
+9 |
|
|
|
|
| 250 | - 5 . 0 | ||
|
|
|
|
| 500 | +9 | . 0 | ||
0dB |
|
|
|
|
| ||||
|
|
|
|
| 1k | +3 | . 0 | ||
|
|
|
|
|
| ||||
|
|
|
|
|
| 2k | - 5 . 0 | ||
|
|
|
|
| 4k | - 7 . 0 | |||
63 | 250 | 1k | 4k | 16k | 8k | - 18 | . 0 | ||
16k | - 20 | . 0 | |||||||
125 500 | 2k | 8k | |||||||
RETURN |
|
|
|
|
| EXIT |
56