6-1 PRESET G. EQ ADJ
These modes allow you to set a
1. Select “6. ACOUSTIC EQ” from MAIN MENU with the 3 or 4 cursor buttons and press the OK/ENTER button.
2. Select “PRESET G. EQ ADJ” with the 3 or 4 cursor buttons.
3. Press the OK/ENTER button to enter the selection.
| PRESET | ADJUST |
| |||||
RESET: | CH |
|
| 63 | 0 . 0 | |||
CH | :FL |
|
| 125 | 0 . 0 | |||
+9 |
|
|
|
|
| 250 | 0 . 0 | |
|
|
|
|
| 500 | 0 . 0 | ||
0dB |
|
|
|
|
| |||
|
|
|
|
| 1k | 0 . 0 | ||
|
|
|
|
|
| |||
|
|
|
|
|
| 2k | 0 . 0 | |
|
|
|
|
| 4k | 0 . 0 | ||
63 | 250 | 1k | 4k | 16k | 8k | 0 . 0 | ||
16k | 0 . 0 | |||||||
125 500 | 2k | 8k |
| |||||
RETURN |
|
|
|
|
| EXIT |
RESET:
Using the 1 or 2 cursor buttons, select the channel(s) to be reset to either the currently displayed channel (“CH”) or all channels (“ALL”), and press the OK/ENTER button to enter the setting.
“ALL” : Resets all channels.
“CH” : Resets only the currently displayed channel.
CH:
Select the channel (“FL”, “C”, “FR”, “SR”, “SBR”, “SBL” or “SL”) to adjust with the 1 or 2 cursor buttons, and switch to the adjustment mode with the 4 cursor button.
Frequency:
Select the target frequency on the graph with the 1 or 2 cursor buttons and press the OK/ENTER button to enter the selection. Adjust the level with the 3 or 4 cursor buttons. (Note that this can be adjusted to any level between
Move to the next frequency with the 1 or 2 cursor buttons, and adjust the level.
After you complete this portion of the setup, press the OK/ENTER button to enter the settings. Move cursor to “RETURN” with the 3, 4, 1 and 2 cursor buttons and press the OK/ENTER button.
6-2 CHECK AUTO
These menus are for confirming the results of AUTO SETUP function equalizer measurement (AUDYSSEY, FRONT, FLAT).
1. Select “6. ACOUSTIC EQ” from MAIN MENU with the 3 or 4 cursor buttons and press the OK/ENTER button.
2. Select “CHECK AUTO” with the 3 or 4 cursor buttons.
3. Press the OK/ENTER button to enter the selection.
|
| CHECK | AUTO |
| ||||
MD: | AUDYSSEY |
| 63 | 0 . 0 | ||||
CH:FL |
|
|
|
| 125 | 0 . 0 | ||
+9 |
|
|
|
|
| 250 | 0 . 0 | |
|
|
|
|
| 500 | 0 . 0 | ||
0dB |
|
|
|
|
| |||
|
|
|
|
| 1k | 0 . 0 | ||
|
|
|
|
|
| |||
|
|
|
|
|
| 2k | 0 . 0 | |
|
|
|
|
| 4k | 0 . 0 | ||
63 | 250 | 1k | 4k | 16k | 8k | 0 . 0 | ||
16k | 0 . 0 | |||||||
125 500 | 2k | 8k | ||||||
RETURN |
|
|
|
|
| EXIT |
Select MD (mode) with the 3 / 4 cursor buttons followed by the desired equalizer (“AUDYSSEY”, “FRONT”, “FLAT”).
CH:
Select the channel to check with the 1 or 2 cursor buttons.
Notes:
•The frequency will not be exactly the same as in the Preset G. EQ modes.
•FL and FR are not indicated on the CHECK AUTO 2 menu.
4.Once finished checking, select “RETURN” with the 3 / 4 cursor buttons and press the OK/ ENTER button to return to the “6. ACOUSTIC EQ” menu.
ENGLISH
57