Marantz SR7002, SR8002 Assembling The Am Loop Antenna, Connecting The Antenna Wire To The, Notes

Models: SR7002 SR8002

1 94
Download 94 pages 53.69 Kb
Page 39
Image 39
ASSEMBLING THE AM LOOP ANTENNA

ENGLISH

CONNECTING THE ANTENNA TERMINALS

 

 

FM Feeder Antenna

FM External

Antenna

AM External

 

(For SR8002)

 

 

 

 

AM Loop

Antenna

 

 

 

 

FM Antenna

Antenna

 

 

 

(For SR7002)

 

 

 

 

Antenna

 

 

 

 

Converter

 

 

 

 

(SR8002 Only)

 

 

 

5 ) CONNECTING THE ANTENNA WIRE TO THE GNDANTENNA CONVERTERCONNECTING THE SUPPLIED ANTENNASConnecting the supplied FM antennaConnecting the supplied AM loop antennaCONNECTING AN FM OUTDOOR ANTENNA AM CONNECTING AN AM OUTDOOR ANTENNA ANTManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background

ASSEMBLING THE AM LOOP ANTENNA

1. Release the vinyl tie and take out the connection

4. Place the antenna on stable surface.

line.

 

2. Bend the base part in the reverse direction.

CONNECTING THE ANTENNA WIRE TO THE

ANTENNA CONVERTER

Loosen the screws and attach the wire terminals, then tighten the screws with a screwdriver.

3. Insert the hook at the bottom of the loop part into the slot at the base part.

CONNECTING THE SUPPLIED ANTENNAS

Connecting the supplied FM antenna

The supplied FM antenna is for indoor use only. During use, extend the antenna and move it in various directions until the clearest signal is received.

Fix it with push pins or similar implements in the position that will cause the least amount of distortion.

If you experience poor reception quality, an outdoor antenna may improve the quality.

Connecting the supplied AM loop antenna

The supplied AM loop antenna is for indoor use only.

Set it in the direction and position it to where you receive the clearest sound. Put it as far away as possible from the unit, televisions, speaker cables, and power cords.

If you experience poor reception quality, an outdoor antenna may improve the quality.

1. Press and hold down the lever of the AM antenna terminal.

2. Insert the bare wire into the antenna terminal.

3. Release the lever.

Note:

Connect the shielded grounding wire (black) to the AM antenna GND terminal.

CONNECTING AN FM OUTDOOR ANTENNA

Notes:

Keep the antenna away from noise sources (neon signs, busy roads, etc.).

Do not put the antenna close to power lines. Keep it well away from power lines, transformers, etc.

To avoid the risk of lightning and electrical shock, grounding is necessary.

CONNECTING AN AM OUTDOOR ANTENNA

An outdoor antenna will be more effective if it is stretched horizontally above a window or outside.

Notes:

Do not remove the AM loop antenna.

To avoid the risk of lightning and electrical shock, grounding is necessary.

36

Page 39
Image 39
Marantz SR7002, SR8002 manual Assembling The Am Loop Antenna, Connecting The Antenna Wire To The, Antenna Converter, Notes