@0REMOTE CONT. IN/OUT terminals
Connect to a Marantz component equipped with remote control
@1AUDIO IN/OUT (TV, DVD, VCR1, DSS/VCR2, TAPE, CD/CDR)
These are the analog audio inputs and outputs. There are 6 audio inputs and 4 audio outputs. The audio jacks are nominally labeled for cassette tape decks, compact disc players, DVD players and etc....
The audio inputs and outputs require
@2DIGITAL INPUT (Dig.1 - 6) / OUTPUT (coaxial, optical)
These are the digital audio inputs and outputs. There are 3 digital inputs with coaxial jacks, 3 with optical jacks.
The inputs accept digital audio signals from a compact disc, LD, DVD, or other digital source component.
For digital output, there is 1 coaxial output and 1 optical output.
The digital outputs can be connected to MD recorders, CD recorders, DAT decks, or other similar components.
@3VIDEO IN/OUT
(TV, DVD, VCR1, DSS/VCR2)
These are the video inputs and outputs. There are 4 video inputs and 2 video outputs and each one includes both composite video and
The 2 video output channels can be used to be connected to video tape recorders for making recordings.
@4HDMI INPUT / OUTPUT
This unit has 4 HDMI inputs and 2 HDMI output. The input function can be selected from the OSD menu system. (See page 43)
REMOTE CONTROL
OPERATION (RC8001SR)
NAME AND FUNCTION
The provided remote controller is a universal remote controller. The POWER button, numeric buttons and control buttons are used in common across different input source components.
The input source controlled with the remote controller changes when one of the input selector buttons is pressed.
z
|
| POWER |
| x | |
| OFF | ON/OFF |
| ON | |
|
|
|
|
| |
|
| SOURCE |
| c | |
|
|
|
|
| |
|
|
|
| M | v |
|
|
|
| D1 | |
|
|
|
|
| |
¤1 |
|
|
| D2 |
|
|
|
| D3 | b | |
|
|
|
| ||
|
|
|
| D4 |
|
|
|
|
| D5 |
|
¤0 |
|
|
|
| n |
|
|
|
|
| |
| CH |
|
| VOL |
|
⁄9 |
| OK |
|
| m |
⁄8 |
|
|
|
| , |
|
| LIP·SYNC |
|
| |
| PREV |
|
| MUTE | . |
|
| GUIDE |
|
| |
⁄7 | MENU | 2 |
| EXIT | ⁄0 |
1 |
| 3 | |||
| TEST | CH.SEL |
| SURR |
|
| 7.1CH | ATT |
| ⁄1 | |
| 4 | 5 |
| 6 | |
| DISP | OSD |
| SLEEP |
|
| 7 | 8 |
| 9 |
|
⁄6 |
| THX |
|
| ⁄2 |
CLEAR | 0 |
| MEMO | ||
|
|
|
|
| ⁄3 |
| TV | DVD | VCR | DSS |
|
| TUNER | CD | MD | ⁄4 | |
| TAPE | AUX1 | AUX2 | AMP | ⁄5 |
|
| LIGHT |
|
| |
| 1 |
|
| 2 |
|
RC8001SR
Learning Remote Controller
zInfrared Transmitter and Learning
Sensor
This transmitter emits infrared light. Press the buttons while pointing the transmitter towards the infrared receiver window of the unit or other AV equipment. Be sure to also point towards other remote controls when using the learning function.
xPOWER ON and OFF buttons
(When AMP mode is selected)
These buttons are used to turn the unit on or off.
cSOURCE ON/OFF button
This button is used to turn a specific source (such as a DVD player) on or off independently from the rest of the system.
vM (Mode) button
This button is used to program Macros. Pressing this button switches between Normal mode and Macro mode.
The > button is used to move to the next page. Up to 20 programs (4 pages) can be made. Holding down the M button for three seconds or more switches to the Setup mode, where the Setup menu is shown on the LCD. The Setup menu has four pages, and the > button is used to move to the next page. Pressing the
>button from page 4 returns you to page 1.
bD1 to D5 (Direct) buttons
Five types of direct operations can be performed for each of the 12 source buttons such as the DVD, television, amplifi er, and other AV equipment. The pages can be switched, so 4 pages ⋅ 5 types = 20 operations can be performed for a single source. The text display can also be changed.
n> (Page) button
This button is used to switch pages for the Direct button. The current page is shown on the LCD.
mVOL (Volume) button
This button is used to adjust the volume for the amplifier and television.
Note:
• Set the AMP mode to use this button with the unit.
,MUTE button
This button is used to mute the audio for the amplifier and television.
Note:
• Set the AMP mode to use this button with the unit.
.GUIDE button
This button is used to display the menus for the DVD player, DSS (satellite broadcasting tuner), or other AV equipment.
(when AMP mode is selected)
This button is used to select the LIP.SYNC mode.
⁄0 EXIT button
(when AMP mode is selected)
This button is used to cancel settings in the setup menu.
⁄1 Numeric buttons
These buttons are used to switch between 0 to 9 of the source components. If the source is set to the amplifier, these buttons are used to perform operations.
(when AMP mode is selected)
(1) TEST button
This button is used to enter the test tone menu.
(2) CH SEL. (channel select) button
This button is used to call up SETUP MAIN MENU and adjust speaker levels or 7.1 ch input level.
(3) SURR (surround) button
This button is used to select the surround mode.
(4) 7.1CH button
This button is used to select the output of an external multi channel decoder.
(5) ATT button
When the input signal is too high and the voice distorts even by throttling the unit VOLUME control, turn on this function. “ATT” is indicated when this function is activated.
The input level is reduced. Attenuator is invalid for use with the output signal of “REC OUT”.
Note:
•This function is unavailable during the digital input is selected.
(6)
Speaker mode is switched in the following sequence.
A → B → A+B → off
ENGLISH
11
